C18 Generator Set

rental options Apply for credit

Shop Current Inventory

Caterpillar is leading the power generation marketplace with Power Solutions engineered to deliver unmatched flexibility, expandability, reliability, and cost-effectiveness.

Standby Rating

550/600/650/715/750 ekW

Prime Power Rating

500/545/600/650/680 ekW

Emissions/Fuel Strategy

Low BSFC

Voltage

208 to 600 Volts

Frequency

60 Hz

Speed

1800 rpm

Duty Cycle

Standby, Prime

Engine Model

C18 ATAAC, I-6, 4-Stroke Water-Cooled Diesel

Bore

5.71in

Stroke

7.2in

Displacement

1106.4in³

Compression Ratio

14.5:1

Aspiration

Air to Air Aftercooled

Fuel System

Electronic unit injection

Governor Type

Adem™A4

Length – Maximum

218.5in

Width – Maximum

80.9in

Height – Maximum

107.8in

Air Inlet
- Light duty air cleaner
Governing System
- Electronic governor (ADEM^™ A4)
Control System
- GCCP 1.3
Cooling
- Radiator and cooling fan with guard
- Fan drive, battery charging alternator drive
- Coolant drain line with valve
- Caterpillar extended life coolant
- Package mounted radiator
Exhaust System
- Stainless steel exhaust flex gaskets, raincap and SAE exhaust flange for customer use – shipped loose
Fuel
- Fuel priming pump
- Secondary fuel filters
- Primary fuel filter with integral water separator
Fuel System
- Standard base
Generator
- Load adjustment module provides engine relief upon load impact and improves load acceptance and recovery time
Power Termination
- Busbar
Lube System
- Lubricating oil
- Oil drain valves
Mounting
- Rubber vibration isolators
Mounting System
- Captive linear vibration isolators
Starting/charging
- Standard battery
- 24 volt starting motor
General
- Engine and alternator pre-paint, Caterpillar yellow
- Paint – Caterpillar yellow except rails and radiators gloss black
Telematics
- Cat^® Product Link^™ PL444 cellular

Air Inlet
- Dual element air cleaner
- Heavy duty air cleaner
- Single element air cleaner
Circuit Breakers
- 3 Pole (IEC-100% rated) Circuit breakers – Motorised
- Power terminal strip
- 3 Pole (IEC-100% rated) Circuit breakers – Package mounted
- Shunt trip for IEC breaker
- Padlockable circuit breaker device
- Circuit breaker (IEC) Auxiliary contacts
- 4 Pole (IEC-100% rated) Circuit breakers – Package mounted
- 4 Pole (IEC-100% rated) Circuit breakers – Motorised
Generator
- Anti-condensation heater
- Excitation: [ ] Permanent magnet excitation (PMG) Excited (PM) [ ] Internally Excited (IE)
Control Panels
- Load share module
- Local & remote annunciator modules
- Remote monitoring software
- Digital I/O module
Control Panel
- GCCP 1.4
Control System
- Fuel level sensor and alarm
- Local alarm modules
- Local alarm horn
- Oil temperature displays
- Volt free contact
- Remote annunciator module
Starting/charging
- Heavy duty starting system
- Jacket water heater
- Charging alternator
Cooling System
- Low coolant temperature alarm
- Radiator duct flange
Enclosures
- Sound attenuated / Level 1 High ambient
Exhaust System
- Engine / Enclosure mounted mufflers
- 8 and 10 inch GP flanges
- 10, 25 and 35 dBA mufflers
- Manifold and turbocharger guards
- 8 and 10 inch elbow kits
Fuel System
- Manual fuel transfer pump
- Optional BS799 Compliant Integral – Dual wall fuel tank base
- Skid base / Integral dual wall
General
- CSA Certification
- Integral & sub-base UL listed dual wall fuel tanks
- Narrow, wide or skid base
- Single or dual wall integral fuel tanks
- UL 2200 package
- The following options are based on regional and product configuration:
- Single or dual wall sub-base fuel tanks
- EEC Declaration of Conformity
- Sound attenuated, weather protective or high ambient weather protective enclosure
- Enclosures: Sound attenuated, weather protective
- EU Certificate of Conformance (CE)
Generator And Attachments
- Ingress protection
- Permanent magnet excitation (PMG)
- LC frame generator
- LC frame CIP generator
- Space heaters
Lube System
- Manual sump pump
Starting And Charging
- Jacket water heaters
- 5 Amp Battery charger
- Battery disconnect switch

C18 Generator Set