725 Articulated Truck

Engine Model

Cat® C13B

Gross Power (SAE J1995)

352hp

Net Power (SAE J1349)

345hp

Engine Power (ISO 14396)

347hp

Bore

5.12in

Stroke

6.18in

Displacement

763in³

Note (1)

Advertised power is tested at 1,700 rpm.

Note (2)

Advertised power is tested per the specified standard in effect at the time of manufacture.

Note (3)

The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler, and fan at minimum speed.

Note (4)

Net power when the fan is at maximum speed is 257 kW (345 hp) per the SAE reference conditions.

Note (5)

Meets U.S. EPA Tier 4 Final/EU Stage V, Japan 2014, and Korea Stage V emission standards.

Note (6)

Diesel exhaust fluid (DEF) used in Cat SCR systems must meet the requirements outlined in ISO 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certifications.

No Engine De-rating Below

12500ft

Peak Engine Torque Gross (SAE J1995)

1431lbf·ft

Peak Engine Torque Net (SAE J1349)

1263lbf·ft

Peak Engine Torque Speed

1200r/min

Rated Payload

26.5ton (US)

Heaped (SAE 2:1)

19.6yd³

Struck

15yd³

Tailgate Heaped SAE 2:1

20.8yd³

Tailgate Struck

15.7yd³

Forward – 1

5mile/h

Forward – 2

9mile/h

Forward – 3

14mile/h

Forward – 4

21mile/h

Forward – 5

29mile/h

Forward – 6

34mile/h

Reverse – 1

6mile/h

Note (1)

The declared dynamic operator sound pressure level is 69±2 dB(A) when “ISO 6396:2008” is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f

Note (2)

Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.

Front Axle – Empty

31438lb

Center Axle – Empty

10009lb

Rear Axle – Empty

9502lb

Total – Empty

50949lb

Front Axle – Rated Load

5564lb

Center Axle – Rated Load

23673lb

Rear Axle – Rated Load

23673lb

Total – Rated Load

52911lb

Front Axle – Loaded

37002lb

Center Axle – Loaded

33682lb

Rear Axle – Loaded

33175lb

Total – Loaded

103860lb

Type

High strength Brinell HB450 wear resistant steel

Front Plate

0.28in

Base Plate

0.51in

Side Plates

0.43in

Scow

0.51in

Fuel Tank

105.7gal (US)

Cooling System

21.9gal (US)

Steering/Hoist Hydraulic System

32.5gal (US)

Engine Crankcase

11.4gal (US)

Transmission

12.4gal (US)

Output Transfer Gear Box

6.6gal (US)

Final Drive – Each

33gal (US)

DEF Tank

9gal (US)

Raise Time

12s

Lower Time

Brakes

ISO 3450 – 2011

Cab – FOPS

ISO 3449 – 2005 Level II

Cab – ROPS

ISO 3471 – 2008

Steering

ISO 5010 – 2019

Turning Dimensions – Steer Angle – Left/Right

45°

Turning Dimensions – SAE Turning Radius

294in

Turning Dimensions – Clearance Radius

318in

Turning Dimensions – Inside Radius

153in

Turning Dimensions – Aisle Width

210in

Note

Dimensions are for machines equipped with 23.5R25 tires.

Lock to Lock

4.75 seconds @ 60 rpm

Hydraulic Excavators: 350/352 – Passes

4-5

Hydraulic Excavators: 336 – Passes

5-6

Wheel Loaders: 972/972 XE – Passes

3-4

Wheel Loaders: 966/966 XE – Passes

Wheel Loader: 962 – Passes

4-5

Wheel Loader: 950 – Passes

Note

An optimum system match gives you a major productivity advantage. The 725 is an excellent match for the Cat 350/352 and 336 Hydraulic Excavators and Cat 972, 966, 962, and 950 Wheel Loaders. Having matched loading and hauling tools results in increased pr

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Seats:
  – Operator: fully adjustable, air suspension
  – Trainer: padded with lap belt
- Windshield wiper and washer, two speed, intermittent (front)
- Touchscreen display incorporating the rearview camera video feed
- Retractable belt: Operator seat and second seat
- Sun visor
- Mirrors: exterior
- Adjustable air vents
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Hoist control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
- Tilt and telescopic steering wheel
- Combined gear selection and hoist control lever
- Glass windows:
  – Front, laminated and tinted
  – Sides and rear, toughened and tinted
- Air conditioning
- Secondary steering – electro hydraulic
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure warning
  – Seat belt warning
  – Secondary steering failure warning
  – Diesel Particulate Filter (DPF) regeneration filter
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Heater and defroster with four-speed fan
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind operator seat storage
  – Coat hook
- Windows opening both sides, tinted
Technology
- Cat^® Detect with Stability Assist
- Product Link Cellular PLE643
Electrical And Lighting
- Electrical system: 24-volt, 5A 24- to 12-volt converter
- Main disconnect switch
- Batteries (two) maintenance free
- Horn
- Remote starting receptacle (cables not included)
- Lighting systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light/cab access light
  – Two stop/tail lights
  – Front and rear direction indicators
Powertrain
- Three axle, six-wheel drive
- Dual circuit oil immersed, enclosed brakes – all wheels
- Retarder: engine compression brake
- Cat C13B engine
- Clean Emission Module (CEM) and exhaust aftertreatment package
- Auto shift six-speed forward and single speed reverse transmission
- Differentials: standard with automatic clutched inter- and cross-axle differential locks
Safety
- Reverse alarm
- Rearview camera
- Rollover protective structure/falling objects protective structure (ROPS/FOPS) cab
Guards
- Radiator
- Crankcase
- Rear window
- Front dump body spill guard, integral part of fabricated body
Other Standard Equipment
- S·O·S sampling valves
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- Vandalism protection: lockable caps
- Tires, six 23.5R25
- Sound suppression (standard in some countries*)
  –*Countries are EU countries plus Iceland, Norway, Lichtenstein, Switzertland, Türkiye and UK.

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Infrared glass – high ambient cab
- Mirrors, heated motorized
- Radio, Bluetooth^® stereo system
- Seat, heated/cooled
- Seat belt, four-point
- Window blinds
- Windshield wiper and washer, single-speed (rear)
Technology
- Operator Coaching
- Cat^® Payload monitoring system
- Product Link Dual PLE683
Electrical And Lighting
- Cold weather start attachment (2 additional batteries)
- Engine block heater
- Ether start
- Flashing LED beacon
- Roof mounted LED work lights
Optional Equipment
- Auto lube installation for automatic greasing of bearings
- Fuel additive – anti-waxing
- Bare chassis (no body) standard wheel base
- Cold weather coolant –51° C (–60° F)
- Scissor tailgate
- Wheel chocks
- Fast fuel fill
- Body liners
- Exhaust heated body

725 Articulated Truck