New CAT D10 Large Dozer | Holt of California

Engine Model

Cat® C27

Engine Power – Net SAE J1349/ISO 9249** – Forward

602hp

Engine Power – Gross SAE J1995* – Forward

631hp

Engine Power – Gross SAE J1995* – Reverse

801hp

Engine Power – ISO 14396* – Forward

620hp

Engine Power – ISO 14396* – Reverse

789hp

Engine Power – Net SAE J1349/ISO 9249** – Reverse

756hp

Displacement

1648in³

Stroke

6in

Bore

5.4in

Emissions

U.S. EPA Tier 4 Final/EU Stage V

Note (1)

*Excludes all fan losses.

Note (2)

All Engine ratings apply at 1,800 rpm.

Note (3)

Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).

Note (4)

Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).

Note (5)

**Net power advertised is the power available at the flywheel when the engine is equipped with air cleaner, muffler, alternator, fan, and engine emissions controls as required at 25° C ambient temperature.

Operating Weight

154888lb

Shipping Weight

111739lb

Note (1)

D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

Note (2)

D10 Shipping Weight includes coolant, lubricants, 10% fuel, FOPS cab, fast fuel, and 610 mm (24 in) ES shoes.

Shoe Type

Extreme Service (ES)

Width – Shoe

24in

Shoes/Side

Grouser Height

3.7in

Pitch

10.2in

Ground Clearance

28.5in

Track Gauge

100.4in

Length – Track on Ground

152.8in

Ground Contact Area

7347in²

Track Rollers/Side

Number of Carrier Rollers

1 per side (optional)

ROPS

Rollover Protective Structure (ROPS) meets the following criteria: ISO 3471:2008.

FOPS

Falling Object Protective Structure (FOPS) meets the following criteria: ISO 3449:2005 LEVEL II.

Sound

Operator Sound Pressure Level (ISO 6396:2008): 78 db(A)

Note

The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The measurement was conducted with the cab doors and the cab windows closed. The cab was properly installed and

Sound (1)

Exterior Sound Pressure Level (ISO 6395:2008): 116 db(A)

Note (1)

The measurement was conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.

Note (2)

The sound levels listed above include both measurement uncertainty and uncertainty due to production variation.

Note (3)

The available sound suppression package can reduce the dynamic exterior sound power level of the machine by up to 4 db(A) and the dynamic operator sound pressure level by up to 2 db(A).

Steering Type

Hydraulically Applied Multiple-Disc Steering Clutch

Brake Type

Spring Applied Multiple- Disc Brake

Brake Diameter

15.4in

Brake Count

Engine Model

Cat® C27

Engine Power – Net SAE J1349/ISO 9249** – Forward

603hp

Engine Power – Net SAE J1349/ISO 9249** – Reverse

722hp

Engine Power – Gross SAE J1995* – Forward

631hp

Engine Power – Gross SAE J1995* – Reverse

766hp

Engine Power – ISO 14396* – Forward

622hp

Engine Power – ISO 14396* – Reverse

756hp

Displacement

1648in³

Bore

5.4in

Stroke

6in

Emissions

U.S. EPA Tier 2 Equivalent

Note (1)

*Excludes all fan losses.

Note (2)

All Engine ratings apply at 1,800 rpm.

Note (3)

Tier 2 equivalent rating (in FWD gears) begins altitude de-rate at 4480 m (14,700 ft).

Note (4)

Tier 4/EU Stage 5 equivalent rating (in FWD gears) begins altitude de-rate at 4420 m (14,500 ft).

Note (5)

Fuel Tank – Usable Volume

323.3gal (US)

Fuel Tank – Total Volume

335.2gal (US)

Pump Type

Variable displacement piston

Pump Output – Implement

112gpm

Note (1)

Implement Pump output measured are 2,010 engine rpm and 7000 kPa (1,015 psi).

Fan Pump

21.7gpm

Note (2)

Fan Pump output measured at 2,010 engine rpm and 26 000 kPa (3,771 psi).

Tilt Cylinder Flow – Rod End Flow

112gpm

Tilt Cylinder Flow – Head End Flow

63.4gpm

Lift Cylinder Relief Valve Setting

4061.1psi

Tilt Cylinder Relief Valve Setting

3872.5psi

Ripper – Lift – Relief Valve Setting

4061.1psi

Ripper – Pitch – Relief Valve Setting

4061.1psi

Tank Capacity

32.2gal (US)

Cylinder Sizing – Blade Lift – Bore

5.5in

Cylinder Sizing – Blade Tilt – Bore

8.3in

Cylinder Sizing – Ripper Shank Lift – Bore

8.3in

Cylinder Sizing – Ripper Shank Angle – Bore

7.1in

Cylinder Sizing – Blade Lift – Stroke

65.1in

Cylinder Sizing – Blade Tilt – Stroke

9.5in

Cylinder Sizing – Ripper Shank Lift – Stroke

21.1in

Cylinder Sizing – Ripper Shank Angle – Stroke

26in

Note (3)

Electro-hydraulic pilot valves assist operations of ripper and dozer controls.

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.600 metric tonnes.

1.0 Forward

2.5mile/h

1.5 Forward

3.4mile/h

2.0 Forward

4.5mile/h

2.5 Forward

6mile/h

3.0 Forward

7.8mile/h

1.0 Reverse

3.2mile/h

1.5 Reverse

4.2mile/h

2.0 Reverse

5.6mile/h

2.5 Reverse

7.5mile/h

3.0 Reverse

9.8mile/h

Transmission Clutch Diameter

17in

Type

Planetary powershift

10SU ABR – Capacity (SAE J1265)

24.2yd³

10SU ABR – Width (over end bits)

194.5in

10SU ABR – Height

83.5in

10SU ABR – Digging Depth – Blade Pitch: Full Racked Back (Carry)

19.98in

10SU ABR – Digging Depth – Blade Pitch: Nominal

25.23in

10SU ABR – Digging Depth – Blade Pitch: Full Pitched Forward (Spread)

30.08in³

10SU ABR – Ground Clearance – Blade Pitch: Full Racked Back (Carry)

66.14in

10SU ABR – Ground Clearance – Blade Pitch: Full Pitched Forward (Spread)

53.86in

10SU ABR – Ground Clearance – Maximum Tilt LH

56.3in

10SU ABR – Ground Clearance – Maximum Tilt RH

56.3in

10U ABR – Capacity (SAE J1265)

28.7yd³

10U ABR – Width (over end bits)

207.1in

10U ABR – Height

83.5in

10U ABR – Digging Depth – Blade Pitch: Full Racked Back (Carry)

19.98in

10U ABR – Digging Depth – Blade Pitch: Nominal

60in

10U ABR – Digging Depth – Blade Pitch: Full Pitched Forward (Spread)

30.1in

10U ABR – Ground Clearance – Blade Pitch: Full Racked Back (Carry)

66.1in

10U ABR – Ground Clearance – Blade Pitch: Full Pitched Forward (Spread)

53.9in

10U ABR – Ground Clearance – Maximum Tilt LH

60.8in

10U ABR – Ground Clearance – Maximum Tilt RH

60.8in

10U ABR – Weights – Blade Weight*

23585lb

10U ABR – Weights – Total Operating Weight** (with blade and SS ripper)

154888lb

Note (1)

Maximum LH and RH tilt for 10SU ABR and 10U ABR blades: 17.31 degrees

Note (2)

*Does not include hydraulic controls but includes blade cylinders, pusharms.

Note (3)

**D10 Operating Weight includes coolant, lubricants, full fuel tank, ROPS, FOPS cab, SU ABR bulldozer, dual tilt, single-shank ripper with pin-puller, fast fuel, 610 mm (24 in) ES shoes, and operator.

Maximum penetration force * (shank vertical)

49233lbf

Maximum penetration depth (standard tip)

59.2in

Maximum Clearance Raised – Under Tip, Pinned in Bottom Hole

36in

Weight

14209lb

Note

Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

Maximum penetration force * (shank vertical)

53055lbf

Maximum penetration depth (standard tip)

78.3in

Weight

14548lb

Note

Weight includes one shank. Add 544 kg (1,199 lb) for each additional shank.

Ground Clearance*

28.5in

Track Gauge

100.4in

Width – Without Trunnions – 610 mm/24 in ES

130.4in

Width – Over Trunnions

148in

Height – FOPS Cab*

162.8in

Height – Top of Stack*

171.5in

Height – ROPS/Canopy*

173.5in

Note (1)

*Includes grouser height for total dimensions on hard surfaces.

Length – Track on Ground

152.8in

Overall Length – Basic Tractor

209.6in

Length – With SU-Blade

292in

Length – With U-Blade

305.1in

Length – With Single-Shank Ripper

278.8in

Length – With Multi-Shank Ripper

285.1in

Overall Length – SU-Blade/SS Ripper

360.6in

Cooling System Refill – Tier 4 Final Engine

46.2gal (US)

Engine Crankcase Sump

27.2gal (US)

Power Train – Total Volume

81.4gal (US)

Power Train – Refill Volume

74.8gal (US)

Final Drives (each)

12.2gal (US)

Track Roller Frames (each)

16.9gal (US)

Pivot Shaft Oil

9.5gal (US)

Hydraulic System Tank

32.2gal (US)

Operator Environment
- Air Conditioner and Heater with Automatic Climate Control
- Seat — Cloth with Air Suspension
- Cab Glass — Single-Pane Tinted Safety
- Rollover Protection System (ROPS)/Falling Object Protection (FOPS), Sound-Suppressed Cab
- High-Definition Primary Touchscreen Display
- Cab Access – Blade Push Arm Steps and Grab Handle
- Visibility – Rearview Mirror
Technology
- VIMS
- Cat Product Link^™ Elite (cellular)
- Automated Blade Assist (ABA)
Power Train
- Stator Clutch Torque Divider – Electronic Control
- Powershift Transmission – Three-Speed Electronic Shift
- High-Performance Single-Plane Cooling Package with Aluminum Radiator
- Cat C27 Engine – U.S. EPA Tier 4 Final or Tier 2 Equivalent
Undercarriage
- Lifetime-Lubricated Rollers and Idlers
- Suspension-Type Undercarriage
- Track Shoe (ES): 610/710/785 mm (24, 28, 31 inch) Width
Hydraulics
- Electronically Controlled, Load-Sensing Dozer Lift and Tilt
- Electronically Enabled Blade – Quick Drop
- Electronically Controlled, Load-Sensing Ripper Lift and Pitch
- Dozer Blade – Dual Tilt, Guarded Lines
Electrical
- 24V Electric Start
- Batteries – 2× 200-Amp Hour, 12V
- Battery Isolation – Single Pole
- Lights – LED – 13 Positions
Service And Maintenance
- Replaceable Bearings – Push Arm and Ripper
- Radiator Guard – Swing-Out Access Doors
- Ground-Level Fast Fuel Fill
- Ground-Level Electrical Service Station
- Diagnostic Connector
- Bottom Guards – Hinged with Release Catch
- Scheduled Oil Sampling (S·O·S) Fluid Sampling Ports
- Ecology Fluid Drains – All Compartments

Operator Environment
- Cab Glass – Dual-Pane Laminated Impact Safety
- Visibility – Five Cameras: 360-Degree View and Ripper Camera
- Cab Glass – High-Pressure Safety (40 psi/275 kPa)
- MineStar^™ Terrain Display
- Seat – Heated, Cooled, Adjustable Lumbar and Bolsters
- Visibility – Dual Camera: Backup and Ripper
Technology
- Autocarry^™
- Auto Ripper Control
- Cat Product Link Elite Dual Mode (cellular + satellite)
- Cat Grade with 3D Blade Control
- MineStar Terrain Ready
- MineStar Terrain with Blade Control
- MineStar Command Remote Control Ready
Power Train
- Hydraulic Cooling Fan – Automatic Reversing
Undercarriage
- Abrasion Rollers and Idlers
- Cold Weather Rollers and Idlers
- Carrier Roller
- Track Links – Heavy Duty XL – Duralink
- Track Shoe – Anti-Packing Round Hole
- Sound-Suppression Undercarriage
- Track Shoes : 610/710/786 mm (24/28/31 in) Width (various configurations)
Hydraulics
- Ripper Pin Puller
Electrical
- Lights – LED – Premium Package
- Battery Isolation – Dual Pole
Service And Maintenance
- Ripper Lubrication – Grouped – Ground-Level Fill
- Ground-Level – Fluid Fill and Drain Engine, Power Train, Hydraulic and Coolant
- Sound Reduction Sealed Bottom Guards
- Ripper Lubrication – Autolube with Ground-Level Fill
Rear Attachments
- Counterweight – Rear, 3 Weighted Plates
- No Rear Attachment for customers who already have a rear attachment
- Ripper – Single Shank with Pin Puller and Retrieval Hitch
- Ripper – Single Shank with Pin Puller
- Ripper – Multi Shank (three shank)
- Counterweight – Rear, 4 Weighted Plates
- Ripper – Multi Shank Deep with Pin Puller
Blades
- Semi-Universal (18.5 m3/24.2 yd3)
- Universal (22 m3/28.7 yd3)
Other
- Fire Suppression Ready
- Fire Suppression Installed
Worktools Blades
- Cushion Dozer Blade
- Coal Universal (52 m3/68 yd3)
- Black Blade Paint
- Abrasion Liners and Guards
- Woodchip Universal (72.6 m3/95 yd3)
- Reclaimation Universal (24.5 m3/32 yd3)
- Coal Universal (46.1 m3/60.3 yd3)

D10 Dozer

D10 Dozer

3.99% FOR 48 MONTHS + CVA + EPP

Coming Soon

D10 Dozer

D10 Dozer

SHARE:

D10 Dozer

3.99% FOR 48 MONTHS + CVA + EPP

Coming Soon