EVERY MINUTE MATTERS AND YOU DESERVE TO PROTECT THEM ALL. THAT'S WHY YOU NEED A PERFORMANCE CVA. Learn more!
Find Locations
800-452-5888
Contact us

914 Small Wheel Loader (CAB)

Back to Home

The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine.

Exterior View
Interior View

914 (CAB)

ID Number M25261
Product Make CATERPILLAR
Serial Number 0JC301788
Availability In-Stock
Contact Us To Purchase View Specs Compare

You can only compare up to 3 items at once. Please remove an item to add another.

Credit
0 active viewers

The Cat® 914 Small Wheel Loader features an optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar loader with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Maximum Gross Power
110hp
Rated Net Power - Rated Engine Speed
2200r/min
Maximum Gross Power - Rated Engine Speed
1800r/min
Rated Net Power - SAE J1349
99hp
Maximum Gross Power - ISO 14396 (metric)
112hp
Rated Net Power - ISO 9249
98hp
Maximum Gross Torque - SAE J1995
335ft·lbf
Maximum Gross Torque - ISO 14396
332ft·lbf
Maximum Net Torque - SAE J1349
329ft·lbf
Maximum Net Torque - ISO 9249
327ft·lbf
Displacement
220in³
Bore
3.85in
Stroke
4.72in
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
110hp
Operating Weight
19103lb
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Recyclability
95%
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Cooling System
5.7gal (US)
Fuel Tank
43.6gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Rear Center Differential
2gal (US)
Hydraulic System - Including Tank
25.9gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8gal (US)
Engine Crankcase
2.6gal (US)
Hydraulic Tank
14.5gal (US)
Transmission
0.8gal (US)
Axles - Front Center Differential
2gal (US)
Maximum Flow - Steering Pump
22gpm
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.75turns
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.8s
Maximum Working Pressure - Steering Pump
3263psi
Steering Articulation Angle - Each Direction
40°
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3046psi
Maximum Flow - Implement Pump
39gpm
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24gpm
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3046psi
Hydraulic Cycle Time - Total Cycle Time
12.5s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5.2s
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24gpm
Hydraulic Cycle Time - Dump, at Maximum Reach
1.4s
Relief Pressure - Tilt Cylinder
4931psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32gpm
Maximum Working Pressure - Implement Pump
4061psi
Hydraulic Cycle Time - Rackback
2.2s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
3.7s
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25mile/h
Forward and Reverse - Speed Range 1*
6.3mile/h
Forward and Reverse - Speed Range 2*
12.5mile/h
Other Choices Include
17.5 R25 L3 XHA2; 17.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 17.5 R25 Solid
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Standard Size
17.5 R25 L2 XTLA
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Rear
Oscillating ±11 degrees; Locking differential (Standard)
Front
Fixed; Locking differential (standard)

3.0 m (10 ft) Fusion™ Coupler Snow Plow

Width 120 in

Angled Width 98.3 in

Weight 3062.2 lb

View Details
Contact to purchase

1.5 m3 (1.9 yd3-2) HPL-ISO Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width 94.5 in

Weight 1304.9 lb

Height 42.5 in

View Details
Contact to purchase

1.7 m3 (2.2 yd3) HPL-ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Adapters

Width 95.8 in

Weight 1490.1 lb

Height 45.4 in

View Details
Contact to purchase

1.4 m3 (1.8 yd3) HPL-ISO Coupler Flat Floor Bucket – Performance Series With Weld-On Adapters

Width 95.8 in

Weight 1490.1 lb

Height 42.2 in

View Details
Contact to purchase

3.05 m (10 ft) IT Coupler Straight Snow Push With Rubber Trip Edge

Working Width 120 in

Weight 1677.7 lb

Length 50.4 in

View Details
Contact to purchase

*Advertised price is for the specific ID number associated with the machine shown on this page identified by Holt of California. The price is for a financed machine. The price does not include sales tax due to varying percentages by city/county or doc fees. Pricing and finance terms subject to approval.

Compare