236D3

Gross Power - SAE J1995:2014

74.3hp

Net Power - SAE 1349

73.2hp

Displacement

203in³

Stroke

4.7in

Bore

3.7in

Net Flywheel Power

73.2hp

Engine Model

Cat C2.2

Peak Torque - 1,500 rpm - SAE J1995

195ft·lbf

Net Power - ISO 9249

73.9hp

Rated Operating Capacity

1800lb

Tipping Load

3600lb

Breakout Force - Tilt Cylinder

5003lb

Rated Operating Capacity with Optional Counterweight

2000lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, one speed, OROPS, 1730 mm (68 in) low profile bucket, Cat 10 × 16.5 tires, standard flow hydraulics, mechanical suspension seat, no optional counte

Operating Weight

6567lb

Note

Wheel Base

43.5in

Height - Top of Cab

82in

Vehicle Width over Tires

66in

Ground Clearance

7.7in

Departure Angle

26°

Maximum Dump Angle

48°

Maximum Reach - With Arms Parallel to Ground

53.3in

Turning Radius from Center - Machine Rear

64.5in

Bucket Pin Height - Maximum Lift

122.9in

Length - Without Bucket

108.9in

Rack Back Angle - Maximum Height

91°

Turning Radius from Center - Bucket

83in

Turning Radius from Center - Coupler

51.8in

Clearance at Maximum Lift and Dump

92.9in

Reach - Maximum Lift/Dump

16in

Note

Bumper Overhang - Behind Rear Axle

40.2in

Maximum Overall Height

156.6in

Length - With Bucket on Ground

137.3in

Bucket Pin Height - Carry Position

7.5in

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

Chain Box - Each Side

2.3gal (US)

Cooling System

3.7gal (US)

Engine Crankcase

3gal (US)

Fuel Tank

24.8gal (US)

Hydraulic System

13.2gal (US)

Hydraulic Tank

10.3gal (US)

Hydraulic Flow - Standard - Loader Hydraulic Flow

20gpm

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Pressure

3335psi

Hydraulic Flow - Standard - Hydraulic Power (Calculated)

39hp

Hydraulic Flow - Standard - Loader Hydraulic Pressure

3335psi

Hydraulic Flow - High Flow - Maximum Loader Hydraulic Flow

30gpm

Hydraulic Flow - High Flow - Hydraulic Power (Calculated)

58hp

Travel Speed - Forward or Reverse - Two Speed Option

10.6mile/h

Travel Speed - Forward or Reverse - One Speed

7mile/h

Outside Cab**

101 dB(A)

Note (2)

*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Note (3)

**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Inside Cab*

83 dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.81 kg of refrigerant which has a CO2 equivalent of 1.158 metric tonnes.

Electrical
- 12 volt Electrical System
- 80 ampere Alternator
- Ignition Key Start/Stop Switch
- Lights: Gauge Backlighting, Two Rear Tail Lights, Two Adjustable Front and Rear Halogen Lights, Dome Light
- Backup Alarm
- Heavy Duty Battery, 850 CCA
Operator Environment
- Advanced Display with Rearview Camera: Full Color, 127 mm (5 in) LCD screen; Advanced Multi-operator Security System; On-screen Adjustments for Implement Response, Hystat Response and Creep Control
- Gauges: Fuel Level, Hour Meter
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged, Engine Emission System
- Adjustable Vinyl Seat
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Open, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Interior Rearview Mirror
- 12 volt Electric Socket
- Horn
- Hand (Dial) Throttle, Electronic
- Adjustable Joystick Controls
- Anti-theft Security System with 6-button Keypad
- Storage Compartment with Netting
Power Train
- Cat C3.3B, Turbo Diesel Engine, Meeting Tier 4 Final and Stage V Emission Standards
- Air Cleaner, Dual Element, Radial Seal
- S·O·SSM Sampling Valve, Hydraulic Oil
- Filters, Cartridge-type, Hydraulic
- Filters, Canister-type, Fuel and Water Separator
- Radiator/Hydraulic Oil Cooler (side-by-side)
- Spring Applied, Hydraulically Released Parking Brakes
- Hydrostatic Transmission
- Four Wheel Chain Drive
Other
- Engine Enclosure, Lockable
- Extended Life Antifreeze, –36° C (–33° F)
- Machine Tie Down Points (6)
- Support, Lift Arm
- Hydraulic Oil Level Sight Gauge
- Radiator Coolant Level Sight Gauge
- Radiator, Expansion Bottle
- Cat ToughGuard^™ Hose
- Auxiliary, Hydraulics, Continuous Flow
- Heavy Duty, Flat Faced Quick Disconnects with Integrated Pressure Release
- Split D-Ring to Route Work Tool Hoses Along Side of Left Lift Arm
- Electrical Outlet, Beacon
- Belly Pan Cleanout
- Variable Speed Demand Fan
- Product Link^™ PL240, Cellular
Mandatory Equipment
- Hydraulics, Standard or High Flow
- Quick Coupler, Mechanical or Powered
- Highly Visible Seat Belt, 50 mm (2 in) or 75 mm (3 in)
- EU Preparation Package
- Power Train: One Speed, One Speed with Speed Sensitive Ride Control, Two Speed or Two Speed with Speed Sensitive Ride Control
- Tires, 10 × 16.5 or 12 × 16.5
- PERFORMANCE PACKAGES:
  – Performance Package H1: Standard Flow Hydraulics (No Self Level)
  – Performance Package H2: Standard Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
  – Performance Package H3: High Flow Hydraulics, Dual Direction Electronic Self Level (Raise and Lower), Work Tool Return to Dig, Work Tool Positioner, and Electronic Snubbing (Raise and Lower)
- COMFORT PACKAGES:
  – Open ROPS (C0): Static Seat (No Foot Throttle, Headliner, Heater or Door)
  – Open ROPS (C1): Foot Throttle, Headliner, Cup Holder, and choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) (No Heater or Door)
  – Enclosed ROPS with Heater (C2): Foot Throttle, Headliner, Heater and Defroster, Side Windows, Cup Holder, Radio Ready, choice of Seat (Mechanical Suspension or High Back, Heated, Air Ride Seat) and Door (Glass or Polycarbonate)
  – Enclosed ROPS with A/C (C3): C2 + Air Conditioner

Optional Equipment
- Hand-Foot Style Controls
- External Counterweights
- Beacon, Rotating
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- Paint, Custom
- Product Link PL641, Cellular
- Bluetooth^® Radio with Microphone (AM/FM/Weather Band Receiver with USB and Auxiliary Input Jack)

REAR LIGHTS	CANOPY PACKAGE, PRO PLUS
RIDE CONTROL, NONE	BATTERY,HD,DISCONNECT, 850 CCA
REAR LIGHTS	SEAT BELT, 3"
TIRES, 10/16.5 GA 8PR	HYDRAULIC OIL, STANDARD
CERTIFICATION ARR, P65	INSTRUCTIONS, ANSI, USA
INSTRUCTIONS, ENGLISH	COUNTERWEIGHT,MACHINE,EXTERNAL
AXLES, STANDARD	PRODUCT LINK, CELLULAR PL243

236D3 Skid Steer Loader (CANOPY)

236D3 (CANOPY)

DRIVE INTO SAVINGS THIS OCTOBER

0% FOR 60 MONTHS + CVA

236D3 Skid Steer Loader (CANOPY)

236D3 (CANOPY)

SHARE:

DRIVE INTO SAVINGS THIS OCTOBER

0% FOR 60 MONTHS + CVA

Calculate Payment

Unit Specifications

1730 mm (68 in) Industrial Performance Bucket With Bolt-On Teeth

1324 mm (52 in) Heavy Duty Fork Carriage

SW345, 130 mm (5 in) Wheel Saw

SR118 Snow Blower

T109 Manual Trencher with standard teeth