920

920 (CAB)

ID Number M26030

Product Make CATERPILLAR

Serial Number 0SL402777

Availability In-Stock

Compare

You can only compare up to 3 items at once. Please remove an item to add another.

Credit

0 active viewers

Maximum Gross Power

121hp

Rated Net Power - Rated Engine Speed

2200r/min

Maximum Gross Power - Rated Engine Speed

2200r/min

Rated Net Power - SAE J1349

120hp

Maximum Gross Power - ISO 14396 (metric)

122hp

Rated Net Power - ISO 9249

118hp

Maximum Gross Torque - SAE J1995

372ft·lbf

Maximum Gross Torque - ISO 14396

369ft·lbf

Maximum Net Torque - SAE J1349

366ft·lbf

Maximum Net Torque - ISO 9249

363ft·lbf

Displacement

220in³

Bore

3.85in

Stroke

4.72in

Engine Model

Cat C3.6

Emissions

Engine meets Tier 4 Final/Stage V emission standards.

Note

Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.

Maximum Gross Power - ISO 14396

121hp

Operating Weight

21742lb

Bucket Capacities

1.3-3.5 m3 (1.7-4.6 yd3)

Bucket Capacities - General Purpose

1.3-1.9 m³ (1.7-2.5 yd³)

Bucket Capacities - Light Material

2.5-3.5 m³ (3.3-4.6 yd³)

Recyclability

95%

Transmission

0.8gal (US)

Engine Crankcase

2.6gal (US)

Diesel Exhaust Fluid (DEF) Tank

4.8gal (US)

Axles - Rear

4.5gal (US)

Cooling System

5.7gal (US)

Hydraulic System - Including Tank

25.9gal (US)

Axles - Front

4.5gal (US)

Fuel Tank

43.6gal (US)

Hydraulic Tank

14.5gal (US)

Note

DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005

Note (3)

The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).

Note (2)

The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (4)

*The measurements were conducted with the cab doors and windows closed.

Maximum Working Pressure - Steering Pump

3190psi

Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed

2.3s

Steering Articulation Angle - Each Direction

40°

Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left

3.4turns

Maximum Flow - Steering Pump

21.7gpm

Relief Pressure - Tilt Cylinder

4641psi

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard

25gpm

Maximum Flow - Implement Pump

43.6gpm

Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure

4641psi

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.7s

Note

All cycle times listed are with cylinder snubbing turned off.

Maximum Working Pressure - Implement Pump

4061psi

Hydraulic Cycle Time - Total Cycle Time

11.5s

Hydraulic Cycle Time - Rackback

2.2s

Maximum Flow - Implement Pump - 4rd Function, Maximum Flow

25gpm

Hydraulic Cycle Time - Dump, at Maximum Reach

1.8s

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

4.8s

Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High

40gpm

Note

*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Forward and Reverse - Speed Range 3

25mile/h

Forward and Reverse - Speed Range 2*

12.5mile/h

Forward and Reverse - Speed Range 1*

6.3mile/h

Rear

Oscillating ±11 degrees; Locking differential (standard)

Front

Fixed; Locking differential (standard)

Other Choices Include

17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid

Standard Size

17.5 R25 L2 XTLA

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

LIGHTS, ROADING, RH DIP, LED	FAN, REVERSING
STANDARD WEATHER PACKAGE	ENGINE
POWERTRAIN, HI RIMPULL, 24MPH	COUPLER, FUSION, HIGH LIFT
HYDRAULICS, 3V, HIGH LIFT	STEERING, STANDARD
RIDE CONTROL, HIGH LIFT	CAB, DELUXE, SINGLE BRAKE
CAMERA, REAR VIEW	SEAT BELT, RETRACTABLE 3"
AIR CONDITIONING, R134A REF	SECURITY SYSTEM, NONE
PRODUCT LINK, CELLULAR PL243	TIRES, 20.5 R25, MX, XHA2
FENDERS, STANDARD, 20.5 TIRES	CTWT, HIGH LIFT/AGG, 3230 LBS
HYDRAULIC OIL, STANDARD	INSTRUCTIONS, ANSI
ALARM, BACK-UP	LIGHTS, AUX, LED
STANDARD RADIO (12V)	JUMPER HOSE, 3V, TWIST, FUSION
SEAT, DELUXE PLUS

920 Compact Wheel Loader (CAB)

920 (CAB)

0% FOR 36 MONTHS

3.99% FOR 48 MONTHS + CVA + EPP

920 Compact Wheel Loader (CAB)

920 (CAB)

SHARE:

0% FOR 36 MONTHS

3.99% FOR 48 MONTHS + CVA + EPP

Unit Specifications

3.0 m3 (3.9 yd3) HPL-ISO Coupler High Dump Bucket With Bolt-On Cutting Edge

1.5 m3 (2.0 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

1.9 m3 (2.48 yd3-2) Fusion™ Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.9 m3 (2.4 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

1.34 m3 (1.75 yd3) IT Coupler Extreme Duty Multi-Purpose Bucket With Bolt-On Cutting Edge