EVERY MINUTE MATTERS AND YOU DESERVE TO PROTECT THEM ALL. THAT'S WHY YOU NEED A PERFORMANCE CVA. Learn more!
Find Locations
800-452-5888
Contact us

14 Motor Grader (CAB)

Back to Home

The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine.

Exterior View
Interior View

14JOY (CAB)

ID Number M26035
Product Make CATERPILLAR
Serial Number 0EN400532
Availability In-Stock
Contact Us To Purchase View Specs Compare

You can only compare up to 3 items at once. Please remove an item to add another.

Credit
0 active viewers

The Cat® 14 motor grader delivers powerful road grading with precision blade control, fuel efficiency, and smart technology. It’s ideal for haul road maintenance, site preparation, and heavy-duty grading in rugged jobsites.

Base Power (1st Gear) - Net
238hp
Engine Model
Cat C13
Bore
5.1in
Stroke
6.2in
Speed at Rated Power
1,850 rpm
Note (3)
Net power advertised is the power available at rated speed of 1,850 rpm, measured at the flywheel when engine is equipped with fan, air cleaner, muffler and alternator.
Standard Capability
122°F
Note (2)
Optimized VHP Plus is standard for the 14M3.
Torque Rise
41%
Maximum Altitude - Full Power
13900ft
Maximum Torque - VHP Plus
1137lb/ft
Emissions
Tier 4 Final/Stage V, Tier 3/Stage IIIA equivalent or Tier 2/Stage II equivalent
Maximum Altitude - Full Power (Tier 3)
14349ft
Maximum Altitude - Full Power (Tier 2)
12049ft
Note (1)
Net power is tested per ISO 9249, SAE J1349, and EEC 80/1269 Standards in effect at the time of manufacture.
Standard - Fan Speed - Minimum
550 rpm
Note (4)
Power as declared per ISO 14396. Rated rpm 1,850. VHP+ = 228 kW (306 hp)
Note (5)
Cat engines equipped with a Selective Catalytic Reduction (SCR) system are required to use: Diesel Exhaust Fluid (DEF) which meets the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Standard - Fan Speed - Maximum
1,600 rpm
Displacement
763in³
Number of Cylinders
6
Operating Weight - Typically Equipped
57250lb
Gross Vehicle Weight - Base* - Total
50980lb
Gross Vehicle Weight - Base* - Front Axle
13994lb
Gross Vehicle Weight - Typically Equipped - Total
57250lb
Gross Vehicle Weight - Typically Equipped - Rear Axle
42005lb
Gross Vehicle Weight - Typically Equipped - Front Axle
15245lb
Gross Vehicle Weight - Base* - Rear Axle
36994lb
Note
*Base operating weight calculated on standard machine configuration with 20.5 R25 tires, full fuel tank operator and ROPS cab.
Blade Width
14ft
Arc Radius
16.3in
Throat Clearance
4.6in
Blade Width - With End Bits
169in
Blade Height - With Cutting Edge
24.9in
Blade Width - Without End Bits
164in
Blade Height - Without Cutting Edge
23in
Maximum Depth of Cut
23.3in
Circle Centershift - Left
25.6in
Maximum Lift Above Ground
16.5in
Circle Centershift - Right
20.5in
Blade Tip Range - Backward
5°
Maximum Shoulder Reach Outside of Tires - Right
78.9in
Moldboard Sideshift - Right
31.1in
Moldboard Sideshift - Left
29.1in
Maximum Shoulder Reach Outside of Tires - Left
73.6in
Blade Tip Range - Forward
40°
Circle - Outer Diameter
71.7in
Front Axle - Wheel Lean - Left/Right
17.1°
Front Axle - Total Oscillation per Side
32°
Transmission and Differential
23.5gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Only)
5.8gal (US)
Hydraulic System
33gal (US)
Circle Drive
1.8gal (US)
Cooling System
15.9gal (US)
Fuel Tank
109.9gal (US)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.0 kg (4.4 lb) of refrigerant which has a CO2 equivalent of 2.860 metric tonne (2.76 ton).
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Joystick, power adjustable armrests
    • Air conditioner with heater
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauges (analog) inside cab (includes fuel, articulation, engine coolant temp, engine rpm, and hydraulic oil temp)
    • Gauges, machine level
    • Message display
    • Joystick gear selection
    • Joystick hydraulic controls for implements, steering, transmission
    • Ladders, cab, left and right side
    • Lights, left and right side lights
    • Lights, night time cab, LED
    • Meter, hour, digital
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio ready, entertainment
    • ROPS cab, sound suppressed, less than 73 dB(A) ISO 6394 (70% fan speed)
    • Seat, mechanical suspension, cloth
    • Storage compartments
    • Throttle control, electronic
  • Power Train
    • Air cleaner, dual stage, dry-type radial seal with service indicator through messenger and dust ejector
    • Articulation, automatic Return-to-Center
    • Air-to-Air After Cooler (ATAAC)
    • Auto Diff Lock
    • Brake wear indication
    • Brakes, oil disc, four-wheel, hydraulic
    • Consistent power to ground
    • Monitoring system
    • Clutch, circle drive slip
    • Differential, lock/unlock*
    • Drain, engine oil, ecology
    • Demand fan, hydraulic
    • Engine ECO Mode
    • Ether starting aid
    • Fuel tank, ground level
    • Fuel-water separator
    • Hydraulic demand fan
    • Muffler, under hood (China Nonroad Stage III and Tier 3/Stage IIIA/Tier 2/Stage II equivalent)
    • Optimized VHP
    • Parking brake - multi disc, sealed, oil-cooled
    • Priming pump, fuel
    • Sediment drain, fuel tank
    • Three variations of the C13 engine. One meets Tier 4 Final/Stage V emission standards and is required for higher regulated countries. One meets Tier 3/Stage IIIA/China Nonroad Stage III standards, depending on emission standards of the specific country. One meets Tier 2/Stage II equivalent emission standards and is available for lesser or non-regulated countries, depending on standards of the specific country.
    • Transmission, 8F/6R, power shift, direct drive
  • Electrical
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, HD, 1,125 CCA
    • Breaker panel
    • Electrical system, 24V*
    • Belt, serpentine, automatic tensioner
    • Lights: reversing (LED), roof-mounted roading, stop and tail (LED)
    • Product Link
    • Starter, electric
    • Service lights, enclosure, rear, LED
  • Safety
    • Alarm, back up
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Lockout, hydraulic implement for roading
    • Operator Not Present Monitoring system
    • Paint, glare reducing - top of front frame, rear enclosure and ripper cylinders
    • Seat belt, retractable 76 mm (3 in)
    • Secondary steering
    • Windows, laminated glass: Fixed front with intermittent wiper; Side and rear wipers (3)
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air horn
    • Heated door
    • Mirrors high visibility
    • Mirrors, outside heated 24V
    • Mirrors, outside mounted
    • Seat, heated
    • Seat, heated/ventilated
    • Rearview camera
    • Seat belt indicator
  • Power Train
    • Transmission, autoshift
    • Engine, compression brake
  • Technology
    • Cat GRADE with Cross Slope
    • Stable Blade
    • Advanced Control Joysticks
    • Auto Articulation
  • Guards
    • Debris guard
    • Front axle cylinder guards
    • Rear fenders
    • Sound suppression, engine enclosure and transmission
    • Transmission guard
    • Accumulators, blade lift
    • Fast fill fuel, 378.5 L/min (100 gal/min)
    • Metallic DCM wear strips
  • Electrical
    • Light, LED, warning strobe
    • Lights, front headlights high
    • Lights, front headlights low
    • Mounting, for warning light
    • Working lights halogen
    • Working lights LED
  • Safety
    • Additional rearview camera and monitor
    • Machine security system key
  • Other Attachments
    • Moldboard, 4.9 m (16 ft)
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
    • Hydraulic arrangements with additional hydraulic valves: Base +1, Base +3, Base +4, Base +5, Base +6
    • Product Link satellite, cellular
    • Rim, 431.8 mm x 635 mm (17 in x 25 in) MP (spare)
    • Snow wing, mounting frame ready
    • Fast fill
  • Work Tools/g.e.t.
    • 4.9 m (16 ft) blade with flat cutting edge 254 mm x 35 mm (10in x 1 3/8 in )
    • Push block, counterweight
    • Ripper, rear
    • Tooth, ripper
  • Fluids
    • Coolant, -51 degrees C (-60 degrees F)

Coming Soon

*Advertised price is for the specific ID number associated with the machine shown on this page identified by Holt of California. The price is for a financed machine. The price does not include sales tax due to varying percentages by city/county or doc fees. Pricing and finance terms subject to approval.

Compare