DRIVE INTO SAVINGS THIS OCTOBER! CHECK OUT THESE SPECIAL LIMITED TIME DEALS, SUCH AS NO PAYMENTS FOR 3 MONTHS!
Find Locations
800-452-5888
Contact us

D2 Dozer (CANOPY)

Back to Home

The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine.

Exterior View
Interior View

D2 (CANOPY)

ID Number M61895
Product Make CATERPILLAR
Serial Number 0XKM04347
Availability In-Stock
Contact Us To Purchase View Specs Compare

You can only compare up to 3 items at once. Please remove an item to add another.

Credit
0 active viewers

The Cat® D2 delivers superior performance and the broadest choice of technology features to help you get the most from your dozer. Nimble and responsive, it has power for dozing and finesse for grading. Fully hydrostatic transmission gives you seamless acceleration, so you can get the job done quickly. The load sensing system automatically optimizes ground speed based on load, for the greatest productivity and fuel efficiency.

Engine Model
Cat® C3.6
Power - Net
92hp
Displacement
220in³
Net Power - 2,200 rpm - SAE J1349
92hp
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
92hp
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Operating Weight
18382lb
Operating Weight
18382lb
Operating Weight - LGP
19066lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
Drive Pumps
1
Maximum Travel Speed - Forward
5.6mile/h
Relief Valve Settings
7033psi
Maximum Travel Speed - Reverse
6.2mile/h
Track Motors
2
Pump Output
17.2gpm
Relief Valve Settings
2988psi
Type
Parallelogram
Number of Shanks
3
Height
6.5in
Weight
1222lb
Maximum Digging Depth
13.3in
Maximum Ground Clearance Under Tip
17.6in
Overall Width
67.3in
Maximum Reach - Ground Line
30.2in
Power Train 
Hydrostatic
FOPS
ISO 3449:2005 Level II
ROPS
ISO 3471:2008
Length - Track on Ground - LGP
89in
Track Gauge
61in
Number of Rollers - Each Side
7
Track Gauge - LGP
68in
Ground Pressure - LGP
4.3psi
Shoe Width - Standard
18in
Shoe Width - LGP
25in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
43
Number of Shoes - Each Side - Abrasion Undercarriage 
38
Ground Pressure 
5.7psi
Length of Track on Ground 
89in
Fuel Tank
51.5gal (US)
Crankcase - With Filter
2.8gal (US)
Final Drive - Each - LGP
2.6gal (US)
Cooling System
5gal (US)
Transmission - Hydraulic Tank
23.8gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.9gal (US)
Final Drives - Each Side 
2.6gal (US)
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf (Europe). See label or instruction manual for gas refrigerant identification. If machine is equipped with R134a (Global Warming Potential = 14
BLADE: Digging Depth - LGP
23.2in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Blade Lift Height - LGP
27.9in
BLADE: Blade Width - LGP
124in
BLADE: Blade Width at Maximum Angle - LGP
113.1in
Track Gauge - LGP
67.9in
Ground Clearance - LGP
13in
BLADE: Blade Height - LGP
35.8in
Overall Length - With Blade - LGP
168.2in
BLADE: Blade Capacity (SAE) - LGP
2.42yd³
BLADE: Maximum Tilt - LGP
17.2in
BLADE: Maximum Angle (either side) - LGP
25°
Note
Abrasion Undercarriage
Length of Basic Dozer (without blade) - LGP
129.5in
Width of Dozer (standard shoes, no blade) - Standard
79.1in
Dozer Height - LGP
108.9in
Dozer Height - Standard
108.9in
Width of Dozer (standard shoes, no blade) - LGP
92.9in
Length of Basic Dozer (without blade) - Standard
129.5in
BLADE: Maximum Angle (either side) - Standard 
25°
Ground Clearance - Standard 
13in
Overall Length - With Blade - Standard 
168.5in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard 
52° to 58°
BLADE: Maximum Tilt - Standard 
15.2in
Track Gauge - Standard 
61in
BLADE: Digging Depth - Standard 
23.3in
BLADE: Blade Width - Standard 
109.5in
BLADE: Blade Lift Height - Standard 
29.3in
BLADE: Blade Capacity (SAE) - Standard 
2.59yd³
BLADE: Blade Width at Maximum Angle - Standard 
100.1in
Note 
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
BLADE: Blade Height - Standard 
39.8in
Maximum Line Speed - Full Drum
79ft/min
Maximum Line Speed - Bare Drum
50ft/min
Weight
1747lb
Drum Capacity - Optional Cable
195ft
Rope Diameter - Recommended
0.63in
Winch Drive
Hydraulic
Rope Diameter - Optional
0.75in
Drum Capacity - Recommended Cable
277ft
Maximum Line Pull - Full Drum
20350lb
Speed
Variable
Maximum Line Pull - Bare Drum
32150lb
Control
Hydraulic
Overall width
27.91in
Drum Width
9.65in
Drum Diameter
8in
Winch Length
35.63in
Throat Clearance
5.6in
Maximum line pull – bare drum
40000lb
Drum capacity – recommended cable
371ft
Winch length
27.76in
Overall width
29.2in
Control
Hydraulic
Maximum line speed – bare drum
131ft/min
Maximum line speed – full drum
207ft/min
Drum width
10.8in
Drum capacity – optional
256ft
Throat clearance
6.75in
Weight
1345lb
Rope diameter – recommended
0.63in
Speed
Variable
Maximum line pull – full drum
25000lb
Drum diameter
10in
Rope diameter – optional
0.75in
Winch drive
Hydrostatic
  • Power Train
    • Air cleaner with precleaner, automatic dust ejection and under hood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • Electrical
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • Undercarriage
    • Heavy Duty (HD) Undercarriage (43 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • Hydraulic
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • Cat Technology
    • Low Slip Traction Control (included with ARO and Cat Grade 3D)
    • Slope Indicate
    • Cat Product Link™ PLE643/PLE743 Cellular
    • Third party 3D grade system compatible
    • Stable Blade – Basic Lift
    • Slope Indicate
  • Attachments
    • Rigid drawbar
    • Front pull device
  • Operator Environment
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco Mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic
  • Power Train
    • Air cleaner with external precleaner
    • Installation, winch
  • Electrical
    • Four integrated front LED lights, two rear LED
  • Undercarriage
    • Abrasion Undercarriage (38 section)
    • Track Pairs
      – Track, 460 mm (18 in)
      – Track, 635 mm (25 in)
  • Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
  • Cat Technology
    • Cat Grade with Slope Assist
    • Cat Command Station (availability varies by region
    • Cat Command Console (availability varies by region)
    • Full-color 254 mm (10 in) touchscreen grade display
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Grade 3D with Assist includes:
      – Same Assist with ARO features
      – Steer Assist 3D
      – Grade 3D
    • Assist with Attachment Ready Option (ARO) includes:
      – Slope Indicate
      – Blade Load Monitor
      – Stable Blade Lift and Tilt
      – Slope Assist
      – Traction Control
      – Steer Assist
      – AutoCarry
  • Attachments
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • Operator Environment
    • Power Pitch
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspended, cloth or vinyl
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether

Coming Soon

Compare