270 XE Skid Steer Loader

Gross Power – SAE J1995:2014

121hp

Net Power – SAE 1349

121hp

Net Power – ISO 9249

120hp

Displacement

221in³

Stroke

4.7in

Bore

3.9in

Engine Model

Cat C3.6TA (turbocharged, aftercooled)

Peak Torque – 1,600 rpm – SAE J1995

406lb/ft

Engine Power – ISO 14396

134hp

Note

Advertised power is tested per the specified standard in effect at the time of manufacture. Net power advertised is the power available at the flywheel when the engine is equipped with fan at minimum speed, air intake system, exhaust system, and alternato

Rated Operating Capacity

4015lb

Note

Operating Weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, two speeds, 2036 mm (80in) low profile bucket, Cat 12 × 17.5 tires, HP5 XE hydraulics, enclosed cab with glass door and air conditioning, cloth air

Tipping Load

8029lb

Breakout Force – Tilt Cylinder

8267lb

Rated Operating Capacity with Optional Counterweight

4372lb

Breakout Force – Lift Cylinder

6349lb

Operating Weight

10847lb

Note

Wheel Base

54.6in

Height – Top of Cab

87.5in

Vehicle Width over Tires

72in

Ground Clearance

9.4in

Departure Angle

24.4°

Maximum Dump Angle

43.5°

Roll Back Angle

28°

Reach – Maximum Lift/Dump

29.5in

Turning Radius from Center – Coupler

57.9in

Turning Radius from Center – Machine Rear

74.7in

Bucket Pin Height – Maximum Lift

135.4in

Turning Radius from Center – Bucket

89.1in

Length – Without Bucket

128.7in

Maximum Reach – With Arms Parallel to Ground

46.5in

Clearance at Maximum Lift and Dump

106.9in

Length – With Bucket on Ground

153.9in

Maximum Overall Height

165.9in

Bucket Pin Reach – Maximum Lift

11.1in

Rack Back Angle – Maximum Height

88°

Bucket Pin Height – Carry Position

9.3in

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level I

FOPS Level II

ISO 3449:2005 (Optional)

Cooling System

4.6gal (US)

Engine Crankcase

2.4gal (US)

Fuel Tank

34.5gal (US)

Hydraulic System

10.8gal (US)

Hydraulic Tank

6.9gal (US)

Diesel Exhaust Fluid (DEF) Tank

2.9gal (US)

Hydraulic Flow – Standard – Loader Hydraulic Pressure

3500psi

Hydraulic Flow – XE – Maximum Loader Hydraulic Pressure

4496psi

Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Flow

34gpm

Hydraulic Flow – Standard – Hydraulic Power (Calculated)

46.4hp

Hydraulic Flow – XE – Hydraulic Power (calculated)

103.9hp

Hydraulic Flow – Standard – Loader Hydraulic Flow

23gpm

Hydraulic Flow – High Flow XPS – Hydraulic Power (Calculated)

80.7hp

Hydraulic Flow – XE – Maximum Loader Hydraulic Flow*

40gpm

Hydraulic Flow – High Flow XPS – Maximum Loader Hydraulic Pressure

4061psi

Travel Speed – Forward or Reverse – Two Speed Option

10.6mile/h

Travel Speed – Forward or Reverse – One Speed

7.3mile/h

Outside Cab**

101 dB(A)

Note (1)

Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.

Note (3)

**The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC.

Inside Cab*

83 dB(A)

Note (2)

*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan spee

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Recyclability

93%

Electrical
- Battery disconnect with lockout feature
- Work Tool Electrical Harness
- Heavy duty battery
- 12-volt Electrical System
- 85 Ampere Alternator
- LED Work Lights
- Auto Reverse Lights
- Switch Backlighting
- Interior LED Dome Light
- Backup Alarm
- Electrical Outlet, Beacon
- Exterior Courtesy Lighting
- Automatic Work light notification flash when parking brake is released
Operator Environment
- Full color LCD monitor: Creep speed control, Drive response adjustment, Implement response adjustment, Drive Power Priority adjustment, Language selection (×32), Multi-operator Anti-theft Security System and Monitoring, Maintenance schedule and reminders, Event and Diagnostic Code monitoring, Date /Time/Units/Brightness settings, and Smart Technology for use with Smart Attachments.
- Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Supply Filter Restriction, Hydraulic Oil Temperature, Park Brake Engaged, Engine Emission System (where applicable)
- Gauges: Fuel Level, Hour Meter, Hydraulic Temperature, Hour Meter, Battery Voltage, Tachometer
- Fold In Ergonomic Contoured Armrest
- Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
- ROPS Cab, Tilt Up
- FOPS, Level I
- Top and Rear Windows
- Floor Mat
- Headliner
- Interior Rearview Mirror
- Horn
- Hand (Dial) Throttle, Electronic
- Seat Mounted Joystick Controls
- Cell Phone Storage Pocket
- Cup Holder
- 12-volt power port
- Foot Throttle
Hydraulics
- Selectable control pattern – ISO or H
- Electro/hydraulic implement control
- Electro/hydraulic hydrostatic transmission control Speed sensor guarding
- Heavy duty flat faced quick disconnects with integrated pressure release lever
- Hydraulic oil level sight gauge
Power Train
- Cat C2.8T turbocharged diesel engine, Meeting U.S. EPA Tier 4 Final and EU Stage V emission standards
- Glow plugs starting aid
- Liquid cooled, direct injection
- Extended life antifreeze (–37°C, –34°F)
- Air cleaner, dual element, radial seal
- Scheduled Oil Sampling (S·O·SSM) Valve, Hydraulic Oil Ecology drain – coolant
- Radiator coolant level sight gauge Radiator expansion bottle
- Filter, hydraulic supply, cartridge type
- Filter, hydraulic return, cartridge type
- Filter, canister type, engine oil
- Radiator/hydraulic oil cooler (side-by-side)
- Spring applied, hydraulically released, parking brakes
- Hydrostatic transmission
- Lockable fuel cap
- Hydraulic demand cooling fan
- Auto engine idle
Other
- Auxiliary Hydraulics, Continuous Flow
- Telematics, Product Link, Cellular
- Steel engine door with replaceable louvers
- Engine door – lockable
- Work tool attachment coupler
- Cat ToughGuard^™ hose
Mandatory Equipment
- Quick Coupler: Mechanical or Hydraulic
- High Visibility Seat Belt: 50 mm (2 in), 75 mm (3 in), or 3-point lap/shoulder
- Tires: 12 x 16.5 or 14 x 17.5
Performance Packages
- Performance Package HP5: XE Hydraulics
Comfort Packages
- Enclosed Cab with heat and air conditioning: Side Windows, Cup Holder, Cell Phone Pocket, choice of Seat (Mechanical Suspension, High Back/Heated Air Ride Seat, High Back/Ventilated and Heated Air Ride Seat) and Door choice (Glass or Polycarbonate)
Technology Packages
- T4 – Advanced Touchscreen Monitor, Advanced Joysticks, Push start, X-mount cell phone holder, and a Rear-view camera.
- T5 – T4 + 2 additional side view cameras.
Radio
- Radio, none – for open canopy machines and countries not certified for Bluetooth^® technology
- Integrated AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm Auxiliary (AUX) input, and Bluetooth microphone. Only for use with enclosed cab. Availability varies by country.
- Integrated DAB+/AM/FM radio with Bluetooth technology. Includes USB port, 3.5 mm AUX input, and Bluetooth microphone. Only for use with enclosed cab. Availability varies by country.
Product Link^™
- Product Link Basic series PL243
- Product Link Elite series PLE643
Cooling Fan
- On-demand, variable speed hydraulic cooling fan
- On-demand, variable speed hydraulic cooling fan, with automatic and manual purge reversing operation
Guarding And Sealing Packages
- HD0 – base guarding and sealing (engine air inlet rain cap, front cab-toframe sealing, and hydraulic fill access door)
- HD1– intermediate guarding and sealing (HD0 + cab-to-frame side sealing, lockable fuel fill access door, tilt cylinder guarding, and drive line bottom guarding. Some equipment varies by region)
- HD2 – most comprehensive guarding and sealing (HD1 + turbo guard, exhaust stack wrap, Diesel Particulate Filter (DPF) wrap, quick disconnect guarding, fully enclosed drive line guarding, under step hydraulic lines guard cover, engine air inlet pre-cleaner. Some equipment varies by region

Optional Equipment
- External Counterweights
- Beacon, LED
- Engine Block Heater – 120V
- Oil, Hydraulic, Cold Operation
- 4-point machine lifting eyes
- Paint, Custom
- Speed Sensitive Ride Control
- Bluetooth Key Security
- Attachment Hose Guide
- Corrosion Inhibitor Coating

270 XE Skid Steer Loader