930

Rated Gross Power - SAE J1995

170hp

Engine Model

Cat C7.1*

Performance Mode

Automatic

Rated Gross Power - Rated Engine Speed

1800r/min

Rated Gross Power - SAE J1995 (DIN)

172mhp

Rated Engine Power - ISO 14396

168hp

Rated Engine Power - ISO 14396 (DIN)

170mhp

Rated Net Power - SAE J1349 at Minimum Fan Speed

165hp

Rated Net Power - ISO 9249 at Minimum Fan Speed

165hp

Rated Net Power - ISO 9249 (DIN) at Minimum Fan Speed

167mhp

Maximum Gross Torque - Engine Speed

1400r/min

Maximum Gross Torque - SAE J1995

608ft·lbf

Maximum Gross Torque - ISO 14396

601ft·lbf

Maximum Net Torque - SAE J1349

593ft·lbf

Maximum Net Torque - ISO 9249

595ft·lbf

Displacement

427in³

Bore

4in

Stroke

5in

Note

*Meets U.S EPA Tier 4 Final, EU Stage V off-highway, and Japan 2014 emission standards.

Note (1)

Advertised power is tested per the specified standard in effect at the time of manufacture

Note (2)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Note (3)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Operating Weight

31124lb

Operating Weight - High Lift

31633lb

Bucket Capacities

1.9-5.0 m3 (2.5-6.5 yd3)

Fuel Tank

51.5gal (US)

Cooling System

7.9gal (US)

Engine Crankcase

5.3gal (US)

Transmission - Gear Box

2.2gal (US)

Front Axles

6.9gal (US)

Rear Axles

6.6gal (US)

Hydraulic System - Including Tank

43.6gal (US)

Hydraulic Tank

23.8gal (US)

Diesel Exhaust Fluid (DEF) Tank

5gal (US)

Note

DEF used in Cat systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1:2019.

Forward and Reverse - Range 1*

1-13 km/h (0.6-8 mph)

Forward and Reverse - Range 2

8mile/h

Forward and Reverse - Range 3

17mile/h

Forward and Reverse - Range 4

25mile/h

Note

*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph).

Standard Size

20.5 R25, radial (L-3)

Other Choices Include

20.5 R25, radial (L-2), 20.5 R25, radial (L-5), 20.5-25 12PR (L-2), 20.5-25 12PR (L-3), 20.5-25 16PR (L-5), 17.5 R25, radial (L-2), 17.5 R25, radial (L-3), 17.5 R25, radial (L-5), 550/65 R25 radial (L-3), Skidder/Agriculture

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Note (2)

In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

Note (3)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 LEVEL II

Front

Fixed; Locking differential (standard)

Rear

Oscillating ± 11 degrees; Open differential (standard); Limited slip differential (optional)

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent of 2.717 metric tonnes (2.99 tons).

Operator Sound Pressure (ISO 6396:2008)

68dB(A)

Average Exterior Sound Pressure (ISO 6395:2008)

101dB(A)

Note (1)

European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701.

Recyclability

95%

Height - Ground to Cab**

10.92ft

Height - Ground to Beacon**

12.17ft

Height - Ground to Axle Center**

2.25ft

Height - Ground Clearance**

1.33ft

Length - Overall*

24.67ft

Length - Rear Axle to Bumper

6.5ft

Length - Hitch to Front Axle

4.92ft

Length - Wheel Base

9.83ft

Clearance - Bucket at 45°*

9.25ft

Clearance - Load over Height**

10.9ft

Clearance - Level Bucket**

11.75ft

Height - Bucket Pin**

12.83ft

Height - Overall**

16.9ft

Reach - Bucket at 45°*

3.5ft

Carry Height - Bucket Pin

1.25ft

Dig Depth**

3.9in

Width - Bucket

8.33ft

Width - Tread Center

6.33ft

Turning Radius - Over Bucket

19.5ft

Width - Over Tires

8.33ft

Turning Radius - Outside of Tires

17.75ft

Turning Radius - Inside of Tires

9.33ft

Rack Angle at Full Lift

54°

Dump Angle at Full Lift

49°

Rack Angle at Carry

43°

Departure Angle

33°

Articulation Angle

40°

Operating Weight

31124lb

Note (1)

*Vary with bucket.

Note (2)

**Vary with tire.

Note (3)

Dimensions listed are for a machine configured with 2.1 m³ (2.7 yd³) general purpose Fusion™ bucket, bolt-on cutting edge, standard counterweights, additional guarding, 80 kg (176 Ib) operator and 20.5 R25 (L-3) XHA2 tires.

Height - Ground to Cab**

10.92ft

Height - Ground to Beacon**

12.17ft

Height - Ground to Axle Center**

2.25ft

Height - Ground Clearance**

1.33ft

Length - Overall*

27.3ft

Length - Rear Axle to Bumper

6.5ft

Length - Hitch to Front Axle

4.92ft

Length - Wheel Base

9.83ft

Clearance - Bucket at 45°*

11.25ft

Clearance - Load over Height**

11.58ft

Clearance - Level Bucket**

13.67ft

Height - Bucket Pin**

14.75ft

Height - Overall**

18.83ft

Reach - Bucket at 45°*

4.58ft

Carry Height - Bucket Pin

2.08ft

Dig Depth**

5.3in

Width - Bucket

8.33ft

Width - Tread Center

6.33ft

Turning Radius - Over Bucket

20.75ft

Width - Over Tires

8.33ft

Turning Radius - Outside of Tires

17.75ft

Turning Radius - Inside of Tires

9.33ft

Rack Angle at Full Lift

53°

Dump Angle at Full Lift

48°

Rack Angle at Carry

49°

Departure Angle

33°

Articulation Angle

40°

Operating Weight

31633lb

Note (1)

*Vary with bucket.

Note (2)

**Vary with tire.

Note (3)

Steering Cylinder - Bore Diameter

2.8in

Steering Cylinder - Rod Diameter

1.6in

Steering Cylinder - Stroke

17.2in

Maximum Flow - Steering Pump

34gpm

Maximum Working Pressure - Steering Pump

3500psi

Steering Cycle Times (Full Left to Full Right) - Minimum RPM: Pump Flow Limited

2.8s

Steering Cycle Times (Full Left to Full Right) - Maximum RPM: 90 RPM Steering Wheel Speed

2.4s

Maximum Flow - Implement Pump

50gpm

Maximum Flow - Implement Pump - 3rd Function Maximum Flow*

50gpm

Maximum Flow - Implement Pump - 4th Function Maximum Flow*

42gpm

Maximum Working Pressure - Implement Pump

3771psi

Relief Pressure - Tilt Cylinder

4061psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure

3771psi

Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure

4061psi

Lift Cylinder: Standard Lift Linkage - Bore Diameter

4.7in

Lift Cylinder: Standard Lift Linkage - Rod Diameter

2.6in

Lift Cylinder: Standard Lift Linkage - Stroke

28.7in

Tilt Cylinder: Standard Lift Linkage - Bore Diameter

5.9in

Tilt Cylinder: Standard Lift Linkage - Rod Diameter

3.5in

Tilt Cylinder: Standard Lift Linkage - Stroke

21.9in

Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift

5.1s

Hydraulic Cycle Time - Dump (at Maximum Lift Height)

1.5s

Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level

2.7s

Hydraulic Cycle Time - Total Cycle Time

9.3s

Note

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped.

NOTE: Not all features are available in all regions.
Operator Environment
- 75 mm (3 in) retractable seatbelt
- Automatic temperature control
- Cab, enclosed ROPS/FOPS pressurized and sound suppressed
- Push to Start
- 8 Inch Touch Screen
- Jog Dial with screen control
- Programmable Joystick
- Cup holders
- External mirrors with lower parabolic
- Ground level cab door release
- Hydraulic control lockout
- Interior cab lighting, door
- Lunch box storage
- Operator Not Present system
- Radio ready speakers
- Rear window defrost, electric
- Seat mounted electronic implement controls, adjustable
- Sliding glass on side window
- Column mounted multi function control lights, wipers, turn signal
- Suspension seat, fabric
- Tilt steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front
- Wet arm wiper washer, rear
- Mounting Provision
- Digital hour meter, odometer and tachometer
- Digital ground speedometer and direction indicator
- Engine coolant temperature gauge
- Fuel and diesel exhaust fluid levels
- Hydraulic oil temperature gauge
Power Train
- Cat C7.1 engine
- Auto idle shut down feature
- Auto Engine RPM
- Tier 4 Final/EU Stage V compliant
- Turbocharged and aftercooled
- Filtered crankcase breather
- Diesel particulate filter
- Selective catalyst reduction
- Dry type air cleaner
- Coolant protection to –34 °C (–29 °F)
- Fuel priming pump, automatic
- Fuel water separator
- Differential lock in front axle
- Axle seal guards
- Enclosed wet disc full hydraulic brakes
- Parking brake, electric
- Lubed for life driveshafts
- Hydrostatic transmission with electronic control
- Operator modes (TC, Hystat, Single Pedal and Ice)
- Directional shift aggressiveness (fast, medium, slow)
- Auto Wheel Torque control, adjust wheel torque
- Creeper control, adjust ground speed
- Single plane cooling package, wide 6 fins per inch density
- Hydraulically driven demand cooling fan
- Scheduled Oil Sampling (S·O·SSM) port, engine, coolant, transmission
Hydraulics
- Automatic lift and bucket kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Hydraulic diagnostic connectors and S·O·S ports
- Hydraulic sight gauge, visible
- Load sensing hydraulics and steering
- Seat mounted hydraulic joystick controls
- Cat Payload
Electrical
- Alternator, 115-amp, heavy duty
- 12V power supply in cab (2)
- Batteries, 1,000 CCA (2) 24-volt system, disconnect switch
- Back up alarm
- Emergency shutdown switch
- LED rear stop and turn lights
- Heavy duty gear reduction starter
- Product Link^™ Elite
- Remote jump start post
- Resettable main and critical function breakers
- Roading lights front and rear
Other
- Large-access enclosure doors with adjustable close/open force
- Parallel lift loader linkage
- Recovery hitch with pin
- Remote mounted lubrication points
- Lockable compartments
- 1000-hour Service Intervals (after initial 500)

NOTE: Not all features are available in all regions.
Operator Environment
- Joystick steering – 25 mph (40 kph) capable
- Radio packages
- Telescoping Steering Column
- Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
- Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Rear Object Detection
- Multi View Camera
- Front View Camera, roof mounted
- Heated external Mirrors (2)
- Electrically adjustable and heated external mirrors (2)
- Internal Mirrors (2)
- Sunscreen, front and rear
- Windshield Washing Platform
- Powered precleaned for cab air
- Cab guarding
Power Train
- Differential, limited slip, rear
- Powertrain Guarding
- Tire Pressure Monitoring (TPM)
- Range of Tire Options
- Fenders (extended cover and full coverage)
Hydraulics
- Auxiliary flow, third and fourth function
- Connect Under Pressure Disconnects
- Ride Control System, adjustable via display
- Autolube, integrated in display
- Biodegradable Oil
- Debris packages (low, medium, high)
Electrical
- Cold start package
- Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Beacon light, strobe
- Light Guarding
Other Optional Equipment
- Linkage, high lift
- Coupler, (Fusion and ISO 23727:2009)
- Heavy Counterweight
- Aggregate Counterweight
- Cat Payload Printer
- Cylinder Guarding
- Range of Work Tool Attachments

FILM GP, AGGREGATE	930 14A WHEEL LOADER
CHASSIS AR-930	ELECTRICAL AR
HYDRAULIC AR	POWER TRAIN AR
INSTALLATION AR	ELECTRONICS AR-M
HYDRAULIC OIL, STANDARD	LINES, AUX 3RD, STD LIFT
QUICK COUPLER, FUSION, HIGH VIS	CTWT, AGGREGATE, 3325LBS,6PCS
CARRIAGE, CON, FORK, 72" FUS	JUMPTER LINES, AUX 3RD, FUSION
HYDRAULICS, STANDARD	DIFFERENTIAL, OPEN REAR
LIGHTS, ROADING, HALOGEN, RH	TIRES, 20.5R25 MX XTLA * L2
TOOLBOX AUX, NONE	STEERING WHEEL, STANDARD
WEATHER, COLD START 120V	STANDARD LIFT, COUPLER READY
HYDRAULICS, 3V	MIRROR, BASE
PRODUCT LINK, DUAL PLE683	CAB, STANDARD
RIDE CONTROL	ENVIRONMENT, STANDARD
AIR CONDITIONING, R134A REF	PUSH START, PASSCODE SECURITY
CAMERA, REAR VIEW	STANDARD RADIO (12V), DUAL USB
LIGHTS, AUX, LED, PREMIUM	PREP PACK, UNITED STATES
JOYSTICK 3V, STEERING WHEEL	FENDERS STANDARD
SEAT, PREMIUM, TILT AND TELE	ENGINE
MIRRORS, INTERNAL 1X REAR VIEW	WINDSHIELD ACCESS STEPS, NONE
FILM GP, WARNING, PL, ANSI	DECAL, HI VIS STEP,HANDRAIL,LHS
GUARD, FRONT LIGHTS	BUCKET-S&G, 3.5 YDS, FUS, BOCE

930 Small Wheel Loader (CAB)

930 (CAB)

0% FOR 36 MONTHS

3.99% FOR 48 MONTHS + CVA + EPP

930 Small Wheel Loader (CAB)

930 (CAB)

SHARE:

0% FOR 36 MONTHS

3.99% FOR 48 MONTHS + CVA + EPP

Unit Specifications

5.0 m3 (6.5 yd3) Fusion™ Coupler Light Material Bucket With Bolt-On Cutting Edge

2.9 m3 (3.8 yd3) HPL-ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

4.3 m (14 ft) Fusion™ Coupler Snow Plow

1812 mm (71 in) Fusion™ Coupler Sorting Grapple Fork

2.5 m3 (3.2 yd3) Fusion™ Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge