140/140 AWD Motor Grader

Net Power Range (Tier 4)

179hp

Engine Model

Cat® C9.3

Bore

4.5in

Stroke

5.9in

Speed at Rated Power

2,000 rpm

VHP Plus – Gear – Net Power – Forward 4th

210hp

VHP Plus – Gear – Net Power – Forward 8th

231hp

Base Power (1st Gear) – Net – Metric

181hp

Maximum Torque – VHP Plus

840lb/ft

VHP Plus Range – Net – Metric

133-172 kW (181-234 hp)

Standard Capability

109°F

VHP Plus – Gear – Net Power – Forward 2nd

189hp

VHP Plus – Gear – Net Power – Forward 3rd

200hp

VHP Plus – Gear – Net Power – Forward 1st

179hp

Emissions

U.S. EPA Tier 4 Final/EU Stage V

VHP Plus – Gear – Net Power – Reverse 2nd

189hp

VHP Plus – Gear – Net Power – Forward 5th

215hp

VHP Plus – Gear – Net Power – Reverse 1st

179hp

VHP Plus – Gear – Net Power – Forward 7th

225hp

VHP Plus – Gear – Net Power – Forward 6th

220hp

VHP Plus – Gear – Net Power – Reverse 3rd-6th

200hp

High Ambient – Fan Speed – Standard

1,400 rpm

VHP Plus Range – Net

133-172 kW (179-231 hp)

Torque Rise

38%

Displacement

567.5in³

Number of Cylinders

Derating Altitude

10000ft

High Ambient – Fan Speed – Maximum

1,550 rpm

High Ambient – Fan Speed – Minimum

500 rpm

High – Ambient Capability

122°F

Operating Weight – Typically Equipped

42647lb

Gross Vehicle Weight – Maximum – Front Axle

17075lb

Gross Vehicle Weight – Maximum – Rear Axle

38069lb

Operating Weight – Typically Equipped – Front Axle

12055lb

Operating Weight – Typically Equipped – Rear Axle

30592lb

Gross Vehicle Weight – Base – Front Axle

9343lb

Gross Vehicle Weight – Base – Rear Axle

28077lb

Gross Vehicle Weight – Maximum – Total

55144lb

Gross Vehicle Weight – Base – Total

37420lb

Operating Weight – Typically Equipped – Total

42647lb

Blade Width

12ft

Moldboard – Height

24in

Moldboard – Thickness

0.87in

Arc Radius

16.3in

Throat Clearance

6.5in

Cutting Edge Width

6in

Cutting Edge Thickness

0.6in

End Bit – Width

6in

End Bit – Thickness

0.6in

Blade Pull – Base GVW

25269lb

Blade Pull – Maximum GVW

34262lb

Blade Down Pressure – Base GVW

16038lb

Blade Down Pressure – Maximum GVW

29309lb

Moldboard – Blade Width

12ft

Top Speed – Forward

29mile/h

Top Speed – Reverse

23mile/h

Turning Radius – Outside Front Tires

25.59ft

Steering Range – Left/Right

50°

Articulation Angle – Left/Right

20°

Forward – 1st

2.5mile/h

Forward – 2nd

3.4mile/h

Forward – 3rd

5mile/h

Forward – 4th

6.9mile/h

Forward – 5th

10.6mile/h

Forward – 6th

14.5mile/h

Forward – 7th

19.9mile/h

Forward – 8th

29mile/h

Reverse – 1st

2mile/h

Reverse – 2nd

3.7mile/h

Reverse – 3rd

5.4mile/h

Reverse – 4th

8.4mile/h

Reverse – 5th

15.7mile/h

Reverse – 6th

23mile/h

Fuel Capacity

104gal (US)

Cooling System

15gal (US)

Hydraulic System – Total

26.4gal (US)

Hydraulic System – Tank

16.9gal (US)

Diesel Exhaust Fluid

5.8gal (US)

Transmission – Differential – Final Drives

18.5gal (US)

Engine Oil

7.9gal (US)

Tandem Housing – Each

20gal (US)

Front Wheel Spindle Bearing Housing

0.13gal (US)

Circle Drive Housing

1.8gal (US)

Forward/Reverse Gears

8 Forward/6 Reverse

Transmission

APECS, Direct Drive, Powershift

Brakes – Service

Multiple Oil Disc

Brakes – Service – Surface Area

3565in²

Brakes – Parking

Multiple Oil Disc

Brakes – Secondary

Dual Circuit

Circuit Type

Parallel

Pump Type

Variable Piston

Pump Output

55.7gpm

Maximum System Pressure

3500psi

Reservoir Tank Capacity

16.9gal (US)

Standby Pressure

885psi

Drawbar – Width

3in

Circle – Diameter

60.2in

Circle – Blade Beam Thickness

1.6in

Drawbar – Height

6in

Front Frame Structure – Width

12in

Circle – Height

5.4in

Front Frame Structure – Height

12.6in

Drawbar – Thickness

0.5in

Front-Top/Bottom Plate – Width

12in

Front-Top/Bottom Plate – Thickness

0.87in

Front Axle – Height to Center

23.5in

Front Axle – Wheel Lean – Left/Right

18°

Front Axle – Total Oscillation per Side

32Â°

Circle Centershift – Right

28.7in

Circle Centershift – Left

27.4in

Moldboard Sideshift – Right

26in

Moldboard Sideshift – Left

20.1in

Maximum Blade Position Angle

90°

Blade Tip Range – Forward

40°

Blade Tip Range – Backward

5°

Maximum Shoulder Reach Outside of Tires – Right

77.9in

Maximum Shoulder Reach Outside of Tires – Left

70.5in

Maximum Lift Above Ground

18.9in

Maximum Depth of Cut

28.1in

Ripping Depth – Maximum

16.8in

Ripper Shank Holder Spacing

21in

Ripper Shank Holders

Penetration Force

20812lb

Pry-Out Force

27794lb

Machine Length Increase, Beam Raised

40.6in

Mid, V-Type – Working Width

46.6in

Front, V-Type, 5 or 11 Tooth – Scarifying Depth, Maximum

18.4in

Mid, V-Type – Scarifying Depth, Maximum

11.5in

Rear – Scarifying Depth, Maximum

16.8in

Front, V-Type – Working Width

47.4in

Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holder Spacing

4.6in

Front, V-Type, 5 or 11 Tooth – Working Width

40.6in

Mid, V-Type – Scarifier Shank Holders

Mid, V-Type – Scarifier Shank Holder Spacing

4.6in

Front, V-Type, 5 or 11 Tooth – Scarifier Shank Holders

11-May

Rear – Working Width

84in

Rear – Scarifier Shank Holders

Rear – Scarifier Shank Holder Spacing

10.5in

Brakes

ISO 3450

Steering

ISO 5010

Sound

ISO 6394; ISO 6395

ROPS/FOPS

ISO 3471/ISO 3449

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas.

Height

19.9in

Width

7.9in

Sidewall Thickness – Inner

0.63in

Sidewall Thickness – Outer

0.71in

Drive Chain Pitch

2in

Wheel Axle Spacing

60in

Tandem Oscillation – Front Up

15°

Tandem Oscillation – Front Down

25°

Height – Top of Cab

130in

Length – Counterweight to Ripper

399in

Width – Outside Front Tires

98.9in

Length – Front Axle to Mid Tandem

241in

Length – Front Tire to Rear of Machine

351in

Length – Front Axle to Moldboard

100in

Length – Between Tandem Axles

60in

Width – Outside Rear Tires

98.9in

Width – Tire Center Lines

84.3in

Height – Front Axle Center

23.5in

Height – Exhaust Stack

128in

Height – Top of Cylinders

120in

Ground Clearance – Rear Axle

13.3in

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Powertrain
- Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
- Air-to-air after cooler (ATAAC)
- Belt, serpentine, automatic tensioner
- Brakes, oil disc, four-wheel, hydraulic
- Demand fan, hydraulic, swing-out
- Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
- Differential Lock/Unlock, Automatic
- Drain, engine oil, ecology
- Eco mode
- Electronic over speed protection
- Engine C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
- Fuel tank, 394 L (104 gal), ground level access and sediment drain
- Parking brake – multi-disc, sealed, oil-cooled
- Priming pump, fuel
- Rear axle, modular
- Sediment drain, fuel tank
- Tandem drive
- Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)
Electrical
- Alarm, back up
- Alternator, 150 ampere, sealed
- Batteries, maintenance free, heavy duty, 1125 CCA
- Breaker panel, ground accessible
- Cab harness and electrical hydraulic valves
- Electrical system, 24V
- Grade Control Ready – Cab harness, software, electrical hydraulic valves, bosses and brackets
- Lights, roof-mounted roading, reversing, LED stop and tail
- Product Link
- Starter, electric
Operator Environment
- Accelerator
- Air conditioning with heater
- Arm and wrist rest, electronically adjustable
- Articulation, automatic Return-to-Center
- Cat Messenger operator information system
- Centershift pin indicator
- Coat hook
- Cup holder
- Display, digital speed and gear
- Doors, left and right side with wiper
- Gauge, machine level
- Gauge cluster (analog) – fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
- Hour meter, digital
- Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
- Joystick, adjustable armrests
- Joystick gear selection
- Joystick hydraulic power steering
- Ladders, cab, left and right side
- Lights, night time cab
- Mirror, inside rearview, wide angle
- Power port, 12V
- Radio Ready, Entertainment
- ROPS cab, sound suppressed 70 dB(A)
- Seat, cloth-covered, comfort suspension
- Seat belt, retractable 76 mm (3 in)
- Storage area for cooler/lunchbox
- Throttle control, electronic
- Windows, laminated glass: – fixed front with intermittent wiper – door with intermittent wipers (3)
- Windows: tempered: – left and right side wipers – rear and intermittent wiper
Fluids
- Antifreeze
- Extended Life Coolant to -35° C (-30° F)
Tires, Rims And Wheels
- Partial allowance for tires on 254 — 607 mm (10 — 24 in) multi-piece rims is included in the base machine price and weight
Other Standard Equipment
- Accumulators, brake, dual certified
- Anti-glare paint
- Bumper, rear, integrated with hitch
- CD ROM Parts Book
- Clutch, circle drive slip
- Cutting edges: – 152 — 16 mm (6 — 5/8 in) – curved DH-2 steel – 19 mm (3/4 in) mounting bolts
- Doors (3), engine compartment, locking
- Drawbar – 6 shoes, replaceable wear strips
- Electrical hydraulic valves, hydraulic lines for base 8 functions
- Endbits: – 16 mm (5/8 in) DH-2 steel – 19 mm (3/4 in) mounting bolts
- Fluid check, ground level
- Frame, articulated, with safety lock
- Ground level engine shutdown
- Hammer (emergency exit)
- Horn, electric
- Hydraulic lines for base functions
- Lockout, hydraulic implement (for roading and servicing)
- Moldboard
- Mounting, cab roof accessories
- Pump, hydraulic, high capacity, 98 cm³ (6 in³)
- Radiator, cleanout access (both sides with swing doors)
- Secondary steering
- Serviceability, LH side
- S·O·S ports: engine, hydraulic, transmission, coolant, fuel
- Tandem walkway/guards
- Tool box

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Electrical
- Alternator, 280 ampere
- Batteries: extreme duty, 1,400 CCA
- Lights: Headlights, high
- Lights: Headlights, low
- Lights: Working lights, basic
- Lights: Working lights, plus, LED
- Lights: Warning: beacon or strobe
- Lights: Mounting for warning light
Guards
- Articulation guard
- Fenders, front
- Fenders, rear
- Front axle guard
- Sound suppression (bottom)
- Sound suppression (enclosure)
- Transmission
Operator Environment
- Mirrors, outside: heated 24V
- Mirrors, outside: mounted
- Comfort Plus Arrangement
- Comfort Premium Arrangement
Powertrain
- All Wheel Drive
- Precleaner, snow
- Starter, extreme duty, 1,000 Amps
- Transmission, autoshift
Other Attachments
- Attachment Ready Option (ARO)
- Integrated cross slope
- Accumulators, blade lift
- Camera, rearview
- Cat Product Link 321SR
- Cat Product Link 522
- Drain, ecology, engine Wiggins
- Heater, engine coolant: 120V
- Heater, engine coolant: 240V
- Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
- Snow wing mounting, frame ready
- Starting aid, ether
- Reversing fan, automatic or manual
- Cat Grade with 3D
Work Tools/g.e.t.
- Blade extension, left hand, 610 mm (2 ft)
- Blade extension, right hand, 610 mm (2 ft)
- Counterweight
- Cutting edges, curved
- Endbits, overlay
- Front lift group, mounting
- Front lift group, mechanical
- Grader bit, narrow and super penetration
- Mid-Mount Scarifier, Package
- Moldboard: 4267 mm — 610 mm — 22 mm (14 ft — 24 in — 7/8 in)
- Moldboard: 4267 mm — 686 mm — 25 mm (14 ft — 27 in — 1 in)
- Push plate
- Ripper, rear
- Ripper tooth
- Scarifier, front
- Snow Arrangement
- Snow Wing Ready Package
- Tow hitch
Machine Arrangements
- Canadian Arrangement
- European Arrangement
- TUV Roading Arrangement
Optional Tire Arrangements
- Rim Size – 9 × 24; Wheel Group – Single-Piece; Tires – 14.0R24
- Rim Size – 13 × 25; Wheel Group – Single-Piece; Tires – 17.5R25
- Rim Size – 10 × 24; Wheel Group – Multi-Piece; Tires – 14.0R24
- Rim Size – 10 × 24; Wheel Group – Multi-Piece; Tires – 14.0-24
- Rim Size – 14 × 25; Wheel Group – Multi-Piece; Tires – 17.5R25
- Rim Size – 14 × 25; Wheel Group – Multi-Piece; Tires – 17.5-25
- Note: Consult your dealer for individual tire width, size and brand.

140/140 AWD Motor Grader