EVERY MINUTE MATTERS AND YOU DESERVE TO PROTECT THEM ALL. THAT'S WHY YOU NEED A PERFORMANCE CVA. Learn more!
Find Locations
800-452-5888
Contact us

920 Compact Wheel Loader (CAB)

Back to Home

The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine.

Exterior View
Interior View

920 (CAB)

ID Number M26030
Product Make CATERPILLAR
Serial Number 0SL402777
Availability In-Stock
Contact Us To Purchase View Specs Compare

You can only compare up to 3 items at once. Please remove an item to add another.

Credit
0 active viewers

The Cat® 920 Compact Wheel Loader features a C3.6 engine, the Cat Optimized Z-bar Loader linkage, various work tools, a state-of-the-art electro-hydraulic system, a tuned drivetrain, a cab with all-around visibility, extended service intervals and excellent service access, and standard fuel savings features.

Maximum Gross Power
121hp
Rated Net Power - Rated Engine Speed
2200r/min
Maximum Gross Power - Rated Engine Speed
2200r/min
Rated Net Power - SAE J1349
120hp
Maximum Gross Power - ISO 14396 (metric)
122hp
Rated Net Power - ISO 9249
118hp
Maximum Gross Torque - SAE J1995
372ft·lbf
Maximum Gross Torque - ISO 14396
369ft·lbf
Maximum Net Torque - SAE J1349
366ft·lbf
Maximum Net Torque - ISO 9249
363ft·lbf
Displacement
220in³
Bore
3.85in
Stroke
4.72in
Engine Model
Cat C3.6
Emissions
Engine meets Tier 4 Final/Stage V emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power - ISO 14396
121hp
Operating Weight
21742lb
Bucket Capacities
1.3-3.5 m3 (1.7-4.6 yd3)
Bucket Capacities - General Purpose
1.3-1.9 m³ (1.7-2.5 yd³)
Bucket Capacities - Light Material
2.5-3.5 m³ (3.3-4.6 yd³)
Recyclability
95%
Transmission
0.8gal (US)
Engine Crankcase
2.6gal (US)
Diesel Exhaust Fluid (DEF) Tank
4.8gal (US)
Axles - Rear
4.5gal (US)
Cooling System
5.7gal (US)
Hydraulic System - Including Tank
25.9gal (US)
Axles - Front
4.5gal (US)
Fuel Tank
43.6gal (US)
Hydraulic Tank
14.5gal (US)
Note
DEF used in Cat Selective Catalyst Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC (as amended by 2005/88/EC) is 103 dB(A).
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when the cab is properly installed and maintained, is 77 dB(A).
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (4)
*The measurements were conducted with the cab doors and windows closed.
Maximum Working Pressure - Steering Pump
3190psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
2.3s
Steering Articulation Angle - Each Direction
40°
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
3.4turns
Maximum Flow - Steering Pump
21.7gpm
Relief Pressure - Tilt Cylinder
4641psi
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
25gpm
Maximum Flow - Implement Pump
43.6gpm
Relief Pressure - Tilt Cylinder - 4th Function Relief Pressure
4641psi
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
2.7s
Note
All cycle times listed are with cylinder snubbing turned off.
Maximum Working Pressure - Implement Pump
4061psi
Hydraulic Cycle Time - Total Cycle Time
11.5s
Hydraulic Cycle Time - Rackback
2.2s
Maximum Flow - Implement Pump - 4rd Function, Maximum Flow
25gpm
Hydraulic Cycle Time - Dump, at Maximum Reach
1.8s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
4.8s
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
40gpm
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Forward and Reverse - Speed Range 3
25mile/h
Forward and Reverse - Speed Range 2*
12.5mile/h
Forward and Reverse - Speed Range 1*
6.3mile/h
Rear
Oscillating ±11 degrees; Locking differential (standard)
Front
Fixed; Locking differential (standard)
Other Choices Include
17.5 R25 L3 XHA2; 20.5 R25 L3 XHA3; 17.5-25 L2/L3 SGL; 20.5-25 L2/L3 SGL; 17.5-25 L3 HRL D/L-3A; 17.5 R25 L2 Snow; 20.5 R25 L2 Snow; 17.5 R25 Solid
Standard Size
17.5 R25 L2 XTLA
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (2)
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.

1.6 m3 (2.0 yd3) Pin On General Purpose Bucket – Performance Series With Bolt-On Cutting Edge

Width 94.5 in

Weight 1342 lb

Height 42.5 in

View Details
Contact to purchase

1.6 m3 (2.1 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

Width 95.6 in

Weight 1300.9 lb

Height 45.8 in

View Details
Contact to purchase

1.4 m3 (1.8 yd3) IT Coupler General Purpose Bucket – Performance Series With Bolt-On Teeth

Width 95.6 in

Weight 1173.1 lb

Height 43 in

View Details
Contact to purchase

1.8 m3 (2.3 yd3) HPL-ISO Coupler Flat Floor Bucket – Performance Series With Bolt-On Cutting Edge

Width 94.5 in

Weight 1436.1 lb

Height 45.6 in

View Details
Contact to purchase

3.0 m3 (3.9 yd3) HPL-ISO Coupler High Dump Bucket With Bolt-On Cutting Edge

Width 100.4 in

Weight 1909.2 lb

Height 55.3 in

View Details
Contact to purchase

*Advertised price is for the specific ID number associated with the machine shown on this page identified by Holt of California. The price is for a financed machine. The price does not include sales tax due to varying percentages by city/county or doc fees. Pricing and finance terms subject to approval.

Compare