G3520C Gas Generator

The image displayed does not reflect the exact machine specifications, including attachments represented in the image on this machine.

Continuous Rating
1972 ekW
Fuel Type
Low Energy, Biogas, Coal Gas
Maximum Electrical Efficiency
40.10%
Maximum Standby Rating
1972
Frequency
50 / 60 Hz
RPM
1200 / 1500 / 1800 rpm
Engine Model
G3520C
Displacement
5270in³
Aspiration
TA
Bore
6.7in
Stroke
7.5in
Fuel System
Low Energy, Biogas, Coal Gas
Compression Ratio
11.3
Length
249in
Width
79in
Height
92in
Dry Weight – Genset
37959lb
Weight
37953lb
  • Air Inlet
    • Two-element single-stage air cleaner with enclosure and service indicator
  • Control Panels
    • EMCP 4.3
  • Cooling
    • ANSI Class 6 in/DN customer flange connections for JW inlet and outlet
    • Engine driven water pumps for jacket water and aftercooler
    • 2nd Stage SCAC-Cat Flange
    • Jacket water and SCAC driven pumps
    • Jacket water and SCAC thermostat and outlet–ANSI 6 in/DN150
  • Exhaust
    • Dry exhaust manifolds, insulated and shielded
    • Cat-flanged face outlet on turbocharger
    • Individual exhaust port and turbocharger outlet wired to Integrated Tmeperature Sensing Module (ITSM) with GECM providing alarms and shutdowns
  • Fuel System
    • Fuel system is sized for 31.5 to 47.2 MJ/NM3 dry pipeline natural gas with pressure of 10.2 to 34.5KPa to the engine fuel control valve
    • Electronic fuel metering valve, ANSI flange
    • Throttle plate, 24V DC actuator, controlled by GECM
    • 24V ETR Gas Shutoff Valve
  • Ignition System
    • Electronic Ignition System (controlled by GECM) 
    • Individual Cylinder Detonation Sensitive Timing (DST) 
  • Generator
    • 3-phase brushless, salient pole
    • Class F Insulation & temperature rise
    • Reactive droop 
    • Permanent Magnet Excitiation
    • Winding temperature detectors
    • Anti-condensation space heater
    • SR4B or SR5
    • Busbar connections
    • Caterpillar’s Digital Voltage Regulator (CDVR) with 3-phase sensing and KVAR/PF control
    • SR4B
  • General
    • Crankshaft Vibration Damper and Guard
    • RH Service
    • Parts Book
    • Operation and maintenance manuals
    • Paint – Caterpillar Yellow except rails and radiators gloss black
  • Air Inlet
    • Enclosure Mounting Brackets and Piping
    • Mounting stand
    • Air cleaner with precleaner
  • Contol Panel
    • Custom 8-Light Alarm Module
    • Local NFPA99-110 Alarm Module w/LEDs
    • Remote 24-32V 8/16 Annunciator
    • Synchronizing Module
    • PL1000E/PL1000T Communications Module
    • Engine Failure Relay
  • Control Panels
    • Local alarm module
  • Cooling
    • Inlet/Outlet connections
    • Engine pumps
    • Aftercooler air lines, aftercooler core replacement
    • Jacket water coolant heater
  • Exhaust
    • Mufflers (15/18/25 dBA Attenuation) and spark-arresting muffler with ANSI companion flanges
    • Exhaust expanders
    • Flexible fittings
    • 305/360/406 mm Elbow Kits
  • Fuel System
    • 14-69 kPa (2-10 psi) gas pressure regulator
    • Fuel filter
    • 24V DC Gas shutoff valve
    • 207-276kPa, 30-40 psi gas knockdown regulator
  • Generator
    • Generator Removal
    • Annunciator Modules
    • Medium and high voltage generators and attachment
    • 60 Hz–480/4160 Volt Generator Options
    • Cable access box
    • Generator air filter
    • European Bus Bars
    • Low voltage extension box
    • Bearing temperature detectors
    • 8.7/15 kV Class  Current Transformers (CCCT, DCT, CT)
    • 50 Hz–3300/6600 Volt Generator Options
  • Governing System
    • Load share module
  • Starting/charging
    • Jacket water heater
    • Battery diconnect switch
    • 24V starting motors
    • Battery with cables and rack (shipped loose)
    • 60A, 24V charging alternator (requires engine driven pumps)

Coming Soon