930M Ag Handler Small Wheel Loader

Maximum Gross Power

168hp

Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4)

601ft·lbf

Stroke – Performance Power Mode: Range 1-4

5.3in

Maximum Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4)

1800r/min

Maximum Net Torque – SAE J1349 (Performance [HP+] Power Mode: Range 1-4)

797N·m

Displacement (Performance Power Mode: Speed Range 1-4)

428in³

Emissions

Engine meets U.S. EPA Tier 4 Final emission standards.

Engine Model

Cat® C7.1

Note (4)

No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.

Maximum Rated Gross Power – ISO 14396

168hp

Maximum Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4)

170hp

Note (2)

**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.

Note (3)

Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.

Maximum Gross Power – ISO 14396 (Performance Power Mode: Range 1-4)

168hp

Note (1)

*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.

Bore (Standard Power Mode: Range 1-4)

4.1in

Net Power – ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)

156hp

Stroke (Standard Power Mode: Range 1-3**)

5.3in

Net Power – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)

156hp

Maximum Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3**)

1600r/min

Net Power – ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)

166hp

Net Power – ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

164hp

Net Power – ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)

158hp

Bore (Standard Power Mode: Range 1-3**)

4.1in

Maximum Net Torque – ISO 9249 (Performance Power Mode: Range 1-4)

587ft·lbf

Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3**)

795N·m

Maximum Net Torque – ISO 9249 (Standard Power Mode: Range 1-3**)

776N·m

Net Power – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)

163hp

Displacement (Standard Power Mode: Range 1-3**)

428in³

Maximum Gross Power – ISO 14396 (Standard Power Mode: Range 1-3**)

160hp

Maximum Gross Power – ISO 14396 (metric) (Standard Power Mode: Range 1-3**)

162hp

Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3**)

573ft·lbf

Maximum Rated Gross Power – ISO 14396 (metric)

170mhp

Operating Weight

31382lb

Bucket Capacities

2.1-5.0 m³ (2.7-6.5 yd³)

Bucket Capacities – Light Material

3.1-5.0 m³ (4.0-6.5 yd³)

ROPS

ISO 3471:2008

FOPS

ISO 3449:2005 Level II

Declared Sound Levels – Exterior Sound Power Level (ISO 6395:2008)*

101dB(A)

Declared Sound Levels – Operator Sound Pressure Level (ISO 6396:2008)*

68dB(A)

Note (1)

*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Number of Steering Wheel Turns – Full Left to Full Right or Full Right to Full Left

3.5turns

Maximum Flow – Steering Pump

34gal/min

Steering Cylinder, Double Acting – Bore Diameter

2.8in

Steering Cylinder, Double Acting – Stroke

17.2in

Note (1)

Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.

Maximum Working Pressure – Steering Pump

3500psi

Steering Cycle Times – Full Left to Full Right – Minimum RPM: Pump Flow Limited

2.8s

Steering Articulation Angle – Each Direction

40°

Steering Cycle Times – Full Left to Full Right – Maximum RPM: 90 rpm Steering Wheel Speed

2.4s

Steering Cylinder, Double Acting – Rod Diameter

1.6in

Relief Pressure – Tilt Cylinder

4351psi

Cycle Times – 1,600 rpm – Standard: Total Cycle Time

10.1s

Maximum Flow – Implement Pump

50gal/min

Maximum Flow – Implement Pump – 4th Function Maximum Flow*

42gal/min

Note (2)

Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).

Cycle Times – 1,800 rpm – Performance (HP+): Dump (at Maximum Lift Height)

1.5s

Note

*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.

Cycle Times – 1,800 rpm – Performance (HP+): Total Cycle Time

9.3s

Cycle Times – 1,600 rpm – Standard: Float Down (Maximum Lift to Ground Level)

2.7s

Cycle Times – 1,800 rpm – Performance (HP+): Raise (Ground Level to Maximum Lift)

5.1s

Cycle Times – 1,800 rpm – Performance (HP+): Float Down (Maximum Lift to Ground Level)

2.7s

Relief Pressure – Tilt Cylinder – 3rd and 4th Function Maximum Working Pressure

4061psi

Cycle Times – 1,600 rpm – Standard: Dump (at Maximum Lift Height)

1.7s

Maximum Working Pressure – Implement Pump

4061psi

Relief Pressure – Tilt Cylinder – 3rd and 4th Function Relief Pressure

4351psi

Note (1)

Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.

Cycle Times – 1,600 rpm – Standard: Raise (Ground Level to Maximum Lift)

5.7s

Maximum Flow – Implement Pump – 3rd Function Maximum Flow*

50gal/min

Lift Cylinder: Standard Lift Linkage – Bore Diameter

4.3in

Tilt Cylinder: Standard Lift Linkage – Stroke

21.9in

Tilt Cylinder: Standard Lift Linkage – Rod Diameter

2.8in

Lift Cylinder: Standard Lift Linkage – Rod Diameter

2.4in

Tilt Cylinder: Standard Lift Linkage – Bore Diameter

5.1in

Lift Cylinder: Standard Lift Linkage – Stroke

28.7in

Standard Size

20.5 R25, radial (L-3)

Note (2)

Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Note (1)

Other tire choices are available. Contact your Cat dealer for details.

Other Choices Include

20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX

Transmission – Gear Box

2.2gal (US)

Cooling System

7.9gal (US)

Diesel Exhaust Fluid (DEF) Tank

5gal (US)

Fuel Tank

51.5gal (US)

Axles – Rear

6.6gal (US)

Hydraulic System – Including Tank

43.6gal (US)

Engine Crankcase

5.3gal (US)

Axles – Front

6.9gal (US)

Hydraulic Tank

23.8gal (US)

Note

*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).

Rear Axle

Oscillating

Note (2)

Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.

Front Axle

Fixed

Front Axle – Traction Aid*

Locking differential standard

Rear Axle – Oscillation Angle by Tire Size – 20.5 R25

± 10.5 degrees

Brakes – Service

Inboard wet disc

Rear Axle – Traction Aid

Limited slip differential optional

Brakes – Parking

Spring applied hydraulically released

Rear Axle – Oscillation Angle by Tire Size – 750/65, 620/65

± 7 degrees

Forward – Range 2

8mile/h

Forward – Range 1*

1-13 km/h (0.6-8 mph)

Reverse – Range 4

25mile/h

Reverse – Range 2

8mile/h

Note

Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine

Forward – Range 3

17mile/h

Forward – Range 4

25mile/h

Reverse – Range 3

17mile/h

Reverse – Range 1*

8mile/h

Full Turn Tip Load

19424lb

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Rear

Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Front

Fixed; Locking differential (standard)

Height – Ground Clearance**

1.3ft

Rack Angle at Carry

43°

Departure Angle

33°

Length – Wheel Base

9.8ft

Length – Rear Axle to Bumper

6.5ft

Turning Radius – Over Bucket

19.5ft

Carry Height – Bucket Pin

1.3ft

Width – Over Tires

8.3ft

Note (2)

**Vary with tire.

Dig Depth**

3.9in

Turning Radius – Outside of Tires

17.7ft

Clearance – Level Bucket**

11.75ft

Clearance – Bucket at 45°*

9.1ft

Rack Angle at Full Lift

54°

Height – Overall**

17.1ft

Width – Bucket

8.4ft

Height – Ground to Axle Center**

2.25ft

Height – Bucket Pin**

12.8ft

Operating Weight

31125lb

Width – Tread Center

6.3ft

Turning Radius – Inside of Tires

9.4ft

Reach – Bucket at 45°*

3.6ft

Length – Overall*

24.9ft

Clearance – Load over Height**

10.9ft

Length – Hitch to Front Axle

4.9ft

Height – Ground to Beacon**

12.2ft

Articulation Angle

40°

Height – Ground to Cab**

10.9ft

Note (3)

Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.

Note (1)

*Vary with bucket.

Dump Angle at Full Lift

48°

Length – Rear Axle to Bumper

6.5ft

Departure Angle

33°

Height – Overall**

18.7ft

Reach – Bucket at 45°*

4.4ft

Dump Angle at Full Lift

48°

Width – Bucket

8.4ft

Length – Wheel Base

9.8ft

Width – Tread Center

6.3ft

Length – Hitch to Front Axle

4.9ft

Height – Ground to Axle Center**

2.25ft

Note (1)

*Vary with bucket.

Clearance – Bucket at 45°*

10.7ft

Height – Bucket Pin**

14.4ft

Height – Ground to Beacon**

12.2ft

Carry Height – Bucket Pin

1.9ft

Clearance – Load over Height**

11.6ft

Turning Radius – Outside of Tires

17.7ft

Turning Radius – Over Bucket

20.6ft

Rack Angle at Full Lift

51°

Rack Angle at Carry

47°

Length – Overall*

27ft

Note (2)

**Vary with tire.

Height – Ground to Cab**

10.9ft

Turning Radius – Inside of Tires

9.4ft

Clearance – Level Bucket**

13.4ft

Width – Over Tires

8.3ft

Note (3)

Dig Depth**

5.3in

Articulation Angle

40°

Operating Weight

31441lb

Height – Ground Clearance**

1.3ft

Recyclability

94%

Power Train
- Auto idle shut down feature
- Cat C7.1 engine
  - Power modes (Standard and Performance)
  - Power by range (High Power in Range 4)
  - Turbocharged and aftercooled
  - Diesel particulate filter (Fit for Life)
- Coded start (requires secondary display)
- Differential lock in front axle
- Enclosed wet disc full hydraulic brakes
- Oil sampling ports
- Hydraulically driven demand cooling fan
- Hydrostatic transmission with electronic control
  - Operator modes (Default, TC, Hystat^™, and Ice)
  - Directional Shift Aggressiveness (fast, medium, slow)
  - Rimpull control, adjust wheel torque
  - Creeper control, adjust ground speed
- Axle Duo-Cone^™ seal guards
- Parking brake, electric
- Single plane cooling package wide six fins per inch density
- Throttle lock and max speed limiter
Hydraulics
- Automatic lift lower and tilt kickouts, adjustable in-cab
- Bucket and fork modes, adjustable in-cab
- Cylinder damping at kickout and mechanical end stops
- Fine mode control (fast, medium, slow)
- Hydraulic response setting (fast, medium, slow)
- Load sensing hydraulics and steering
- Load sensing hydraulics and steering
Electrical
- Alternator, 115 amp, heavy duty
- Batteries, 1,000 CCA (2) 24V system, disconnect switch
- Back-up alarm
- Halogen work and roading lights, LED rear tail lights
- Product Link^™ PRO with three year subscription
- Remote jump start post
- Resettable main and critical function breakers
Operator Environment
- Cab, pressurized
- 75 mm (3 in) retractable seat belt, with audible alarm and indicator
- Automatic temperature control
- External heated mirrors with lower parabolic
- Hydraulic control lockout
- Ground level cab door release
- Suspension seat, fabric
- Lunch box storage
- Radio ready speakers
- Rear window defrost, electric
- Mirror, single
- Column mounted multi function control – lights, wipers, turn signal
- Tilt and telescopic steering wheel
- Tinted front glass
- Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
- Camera, rear view
Other Standard Equipment
- Cat optimized Z-bar linkage with parallel lift
- Large-access enclosure doors with adjustable close/open force
- Recovery hitch, with pin
- Remote mounted lubrication points
- Lockable compartments and enclosures

Optional Equipment
- Auto lube, integrated in secondary display
- Auxiliary flow, third and fourth function
- Beacon light, strobe
- Cab, deluxe (standard in Europe)
  - Camera, rear view integrated into advanced display
  - Electrically adjustable external heated mirrors (2)
  - Secondary display to enable features and adjust parameters
  - LED interior lighting
  - Sunscreen, front and rear
  - Touchscreen secondary display
  - Ride control adjustable speed activation
  - Preventative maintenance reminders
  - Integrated help function (26 languages)
- Camera, roof mounted, front view with separate display
- Cat Production Measurement weigh scale system integrated into secondary display
- Cold start package
  - Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
- Coupler, (Fusion and ISO 23727)
- Fenders (extended cover and full coverage)
- Differential, limited slip, rear
- Guarding packages
- Lights, auxiliary, halogen or LED with engine and DEF compartment lights
- Linkage, high lift
- Payload Technology
  - Cat Production Measurement (CPM)
  - CPM Printer
- Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
- Radio packages
- Ride Control System, adjustable through secondary display
- Seats
  - Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
  - Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
- Steering
  - Dual mode and secondary
- Tire Pressure Monitoring (TPM)
- Counterweight, additional options
- Debris packages (low, medium, high)
- Rear Object Detection

930M Ag Handler Small Wheel Loader